Flexible LED Strips - Durable, Weatherproof, and ultra efficient!

All Customer Questions

Question

How many bulbs per inch are on a strip?

Answer

Please see : http://www.oznium.com/led-flex-strips/tech

Question

Will the Flexible LED Strips withstand the heat from a Harley engine if mounted above the engine under the fuel tank? - by Russ (Texas)

Answer

Unfortunately, we haven't tested the heat it can withstand. However, I know a few customer who have their flex strips in their engine, and it works great.

Question

On the flexable led's what size wires come out of them to connect to? - by chris

Answer

18-20 Gauge

Question

could i connect these in parallel with my taillights to turn on when my taillights turn on? - by alex

Answer

yes

Question

http://www.youtube.com/watch?v=yITHKddft1U
can you advise me which control module is hooked up to these lights?

Answer

Please follow this link...
http://www.oznium.com/rgb-led-controller

Question

can the flexible led strips & weatherproof ribbon strips be mixed together controlled by one brain on a bike? i'd like to mix because of the different size applications

Answer

No,
Flexible LED Strips have a common Positive wiring system, while the ribbon strips are common negative

Question

which is brighter? flexible led strips or weatherproof ribbon strips?

Answer

Waterproof Ribbon

Question

are these flexable in more then one direction?if so which directions.thanks - by michael (georgia)

Answer

They are flexible in all directions

Question

If i have 5 separate Million color strips. Can they be wired so that they are the same color when they change or will 5 strips be 5 different colors? - by joe

Answer

It is possible to wire them to a single controller. If you wire them to a single controller, they will change at the same rate.

Question

Does each set of lights have to be wired directly to a switch or can they be connected in series with the closest light set connected to the switch? What kind of switch do you recommend? - by Jim (Frisco, TX)

Answer

You can hook up multiple LEDs to one switch.

They shouldn't be wired in series though. They should be wired in parallel.

The round rocker switch is a popular choice.

Question

i want them on a raptor 700r as headlights how long should the flexible led strip be to do the best performance and how do i mount them - by ivan (brooklyn new york)

Answer

Sounds like a nice application. There is no specific length required. It is totally up to you, and how you want to install them. Obviously, the longer the strip, the brighter it will be. There are many ways to mount them: cable ties, glue, tape, etc.

Question

can i use 1 strip and make a tail lite / brake lite combo? - by frank (greensboro NC)

Answer

It is possible, but you'd have to use a pulse width modulator to control the brightness.

Question

Will these work with the existing battery on my moped (its 12 volt battery) or will I need additional battery or equipment?

Answer

Yes they will work just fine. They are ready to work on any 12 volt power source.

Question

What is the best way to mount these LED Strips?

Answer

There are many ways to mount them: cable ties, glue, tape, etc.