Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (0)
Yesterday (3)
What fuse should i use? (not a poem) |
Author
Message
|
thecollect
Joined: Jul 23 2009 Posts: 5 |
Are you sure you want to delete this post?
Thu Jul 23, 2009 5:22 am
Hello, im wiring up 6 LED's (http://www.oznium.com/led-modules) these ones, i ordered this switch (http://www.oznium.com/rocker-switch) and now im wondering what sort of fuse I should use? im only using these 6 LED's and that switch?I did not order any fuse yet, please someone advise me on the correct way to do this.
Thanks so much! |
|
bad venge
Joined: Jul 28 2007 Posts: 1602  1998 Dodge Avenger Last updated: 05/18/09 |
Are you sure you want to delete this post?
Thu Jul 23, 2009 6:12 am
Current draw is 80 ma per module x6 modules= 480 ma ...
What gauge wire are you using to interconnect these with ??? That would determine fuse size , since the loads under 1/2 amp |
|
thecollect
Joined: Jul 23 2009 Posts: 5 |
Are you sure you want to delete this post?
Thu Jul 23, 2009 6:15 am
well, what gauge do you think i should use for this? 16? 12?
|
|
bad venge
Joined: Jul 28 2007 Posts: 1602 1998 Dodge Avenger Last updated: 05/18/09 |
Are you sure you want to delete this post?
Thu Jul 23, 2009 6:19 am
18/20 would be more then enough ... 5 Amp fuse
|
|
thecollect
Joined: Jul 23 2009 Posts: 5 |
Are you sure you want to delete this post?
Thu Jul 23, 2009 2:48 pm
So I should get a 5 AMP fuse, and run 18 gauge wire?
http://www.oznium.com/self-tap-in-fuse-holder should I use this? |
|
bad venge
Joined: Jul 28 2007 Posts: 1602 1998 Dodge Avenger Last updated: 05/18/09 |
Are you sure you want to delete this post?
Thu Jul 23, 2009 5:35 pm
any fuse holder will work or use an add a circuit
|
The time now is Sat Nov 21, 2009 5:07 am