turn on inverter with switch and relay

I have a scenario where I want to turn on the car power inverter once the ignition is on position. I have a rocker switch (3 prongs) with a dei 528t timer switch. I also want to power on the inverter whenever the car is off. (the inverter has +12/Gnd coming from the battery. I need to be able to turn on/off) Does anyone know if this will? thanks ahead of time.



Relay Diagram: http://akamaipix.crutchfield.com/Manuals/607/607528T.PDF

I'm sorry your post makes NO sense to me ... If you want it on when the car is ON and OFF , wire it direct to the battery ...

What EXACTLY are you trying to accomplish ???

Sorry if is confusing to clear it up.

I have a inverter wired to the car battery. I want to be able to start the inverter with the acc/ignition line with a relay. Then wired a rocker switch to power the inverter when the car is off. Using relay 87a terminal in closed position I will get a constant 12v. How would I go on wiring the relay/switch/inverter together.

just put the invertor on a switch. turn the switch on when the cars on or keep the switch on when the cars off. much easier than what your trying to do

josh9015 wrote:

just put the invertor on a switch. turn the switch on when the cars on or keep the switch on when the cars off. much easier than what your trying to do

I am trying to do that. But I just put it in with the 'acc' line because it might blow the switch itself when powered. I need a way to flicker the switch.

My question above is asking if I can connect the ignition line to a relay and then to a switch.

I found this image: But I am going to switch the 'acc' line with terminal 30?

Problem SOLVED.