FlowLighting Underbody Splitter

All Customer Questions

Question

Is there a difference between the inferno and the blaze splitter....Or are they just the same thing?

Answer

There is a difference. The Inferno splitter is designed for Inferno tubes, and the Blaze splitter is designed for Blaze and Single Color tubes.

Question

Do you attach this to the car battery or the cigarette lighter? - by sanjay (Fairfax County, VA)

Answer

Neither, the splitter plugs into the ECU of whichever FlowLighting underbody kit you wish to accessorize - either the Blaze or Inferno.

Question

How many splitters will the Inferno support? Mike

Answer

The Inferno can support an unlimited number of splitters.
The limiting factor is the power wire gauge to the tubes. The Inferno ECU can support a max of 20 feet of light tubes.

Question

Is there anything you can buy to go in a hole in the firewall so you could easily run more wires through if needed, or any help you could do there?

Answer

How about a rubber grommet? A lot of cars already have wires running through the firewall, you could try to follow those as well.

Question

Can I mount this splitter into the engine bay so that later if I wanted to add a tube, it would be easy?

Answer

You shouldn't mount it in the engine bay because it is not waterproof. If you don't drive the car in the rain, then perhaps it would be ok to mount in the engine bay. There would still be an issue with mounting the ECU in the engine bay because of heat. However you can mount the splitter in another part of your vehicle, and add a tube in your engine bay later on.

Question

Lets say I want to add some one foot tubes to the wheel wells, and the light is scanning on the UB kit. Will I need need to attach two splitters so I can have left and right? Also will the tubes flow or will it be choppy? - by Ira

Answer

Whether you use 1 or 2 splitters is up to you. The splitters do not extend the tube pattern. They simply copy the tube pattern.

Question

Dose this just split the signal to the tubes so that all the tubes will have the same pattern at the same time? (on the inferno) so if you have 4 1ft tubes hookd up, all 4 will be the exact same pattern? - by Zanson

Answer

Yes