Oznium.com Store
Oznium Forum
The value of this forum is in the interaction with your fellow LED lighting enthusiasts.
Register today! - It is FREE and quick

5x120-----5x120.65

Author
Message
BLAZER_97

Joined: Apr 10 2007
Posts: 1565
Location: Decatur TX


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:17 pm

Ok, so i bought the new wheels and they are a 5x120 lug pattern, and the blazer s a 5x120.65, will they still fit with no problem? Googled found nothing, They guy i bought them from said on his ad they would and i emailed him and he said they would. So would they with no problems though?
corvettecrazy

Joined: Dec 17 2003
Posts: 4357
Location: moved (twice)


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:31 pm

They will fit, but the contact points on the lug nuts will be very small. I personally would not put them on my vehicle if I was in your shoes.
BLAZER_97

Joined: Apr 10 2007
Posts: 1565
Location: Decatur TX


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:33 pm

What will it do? icon_eek.gif , just bought them an hour ago icon_redface.gif icon_cry.gif
kornholio788

Joined: May 02 2005
Posts: 9748
Location: Tosa, WI


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:34 pm

Why would you buy them THEN make a thread hahhahahah.
BLAZER_97

Joined: Apr 10 2007
Posts: 1565
Location: Decatur TX


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:38 pm

Why would you care..Because everywhere i asked they said yeah they will fit, then i bought them(only had 4 min left on them), then read about them and then i figured out they may not work
corvettecrazy

Joined: Dec 17 2003
Posts: 4357
Location: moved (twice)


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:45 pm

Well lug nuts have the conical shape to them. When seated properly the whole lug is tight against the wheel.

If the patterns are off slightly then only part of the lug will actually be in contact with the wheel.

Yes people do run them that way and claim to have no issues. I guess if you check often enough to make sure they are tight you probably wont have an issue.

People go through this on GM cars as they are 5x115 and mustang wheels which are 5x114.3 They fit but you have what I described above.
BLAZER_97

Joined: Apr 10 2007
Posts: 1565
Location: Decatur TX


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:48 pm

well is there an adapter for 5x120.65 to 5x120?
Aken

Joined: Feb 12 2003
Posts: 10885


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:53 pm

Ditto to corvettecrazy. You may have no issues, but I would not recommend it.
Aken

Joined: Feb 12 2003
Posts: 10885


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 4:57 pm

BLAZER_97 wrote:
well is there an adapter for 5x120.65 to 5x120?

I found one site that has them, but you'll be paying another $200 for all four through them.

http://adaptitusa.com/index.asp?PageAction=VIEWPROD&ProdID=122
BLAZER_97

Joined: Apr 10 2007
Posts: 1565
Location: Decatur TX


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 5:00 pm

Aken wrote:
BLAZER_97 wrote:
well is there an adapter for 5x120.65 to 5x120?

I found one site that has them, but you'll be paying another $200 for all four through them.

http://adaptitusa.com/index.asp?PageAction=VIEWPROD&ProdID=122


Nvm found them

Wrong, 5 X 120 to 5 X 4.75, i need it the other way around
Aken

Joined: Feb 12 2003
Posts: 10885


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 5:07 pm

Check the link again. I originally posted the backwards one, and edited it for the correct spacer.
BLAZER_97

Joined: Apr 10 2007
Posts: 1565
Location: Decatur TX


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 5:08 pm

Gotcha, thanks, but would the wheel fit on like normal? go all the way back to the hub? What should i look for?
Aken

Joined: Feb 12 2003
Posts: 10885


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 5:13 pm

It will stick out an inch farther than if it were on by itself.
BLAZER_97

Joined: Apr 10 2007
Posts: 1565
Location: Decatur TX


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 5:14 pm

no, i mean without the spacer
Chris

Joined: Sep 27 2004
Posts: 2395
Location: NY


Are you sure you want to delete this post?
  
Post Mon Dec 08, 2008 6:57 pm

The wheel will fit on like "supposed" to, in a way.

It wont sit correctly because the bolt pattern you have on the rim is smaller. You run an issue with breaking things.

People tried to make 4x108's fit on 4x110's on the RX7 board. I bet he never wished he made that choice.

As for yours, I am sure it will be decent. I personally wouldn't have. Sorry mang.
The time now is Thu Sep 20, 2018 2:11 pm
Page 1 of 1