Break free from the crowd, and be the first at the marina overhaul your current boat lighting scheme. Switch from dim incandescent lights to environmentally friendly, energy saving, efficient waterproof LEDs!
Oznium's Flexible LED Strips not only use less wattage than halogen and incandescent equivalents, but even utilize less energy than fluorescent bulbs, and unlike CFLs, don't contain any harmful chemicals inside! Did we mention they have an average life span of over 50,000+ hours, and cost less than fluorescent bulbs? To give you an idea, that's over 11 years of usage, even with the lights on 24 hours a day. Since the Waterproof Marine LEDs contain extreme weatherproofing so they will stay lit anywhere you can think to mount them.
The Flexible LED Strip gives you total lighting flexibility to mount seamlessly in any size or space, put next to no drain on battery, and will never fail due to rigorous quality control testing.Through advanced heat displacement technology, and low wattage, Oznium's Marine LED Strips put out a minimum amount of heat, so there's no fire risk, and they'll fit in almost any home application you can think of!
- In your boat's storage area
- Under & around your steering area
- Under boat cabinets
- Stair Lighting
- Under seating areas
The only limit is your imagination.
Frequently Asked Questions:
Can the LED strips be cut or trimmed?
Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut every 3 LEDs.
Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged.
Can the cut section of the strip be re-used?
While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion.
Once cut, is the strip still waterproof?
If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end.
What is the best way to mount them?
Cable ties, also known as zip ties work for many installations. We also include a surprisingly strong 3M double sided adhesive mounting tape.
Do the LED strips require resistors?
No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source.
What is the "Million" color?
The million color LED strips have red, blue, and green LEDs. They come with a tiny controller which automatically fades through millions of colors. At this time, you can't pause or set the color. It is all automatic. But we're working on a new controller that will give you more control. Buy these today, and you can easily upgrade to a new controller in the future. Check out an action video!
Which wire is power and which is ground?
The silver wire is 12v +, and the gold wire is 12v - (ground). If you accidentally reverse them, nothing bad will happen.
You are currently viewing Marine applications for our Flexible LED Strips.
We also recommend this product for: