Super Bright Ultra Flexible Tri-Chip LED Strip - 12V Motorcycle Ready - Plug and Play LED Strips

I bought all my LEDs from Oznium and the products perform even better than I expected and the installation was fairly easy. I would definitely recommend these to everyone.

November 2011, I purchased four cool white, white background, tri-chip weather proof strips, for use on my Ford Fusion. Very satisfied with the quality and light output. July 2012 I purchased eight more strips, very dissatisfied this time. Upon arrival I unpacked and laid out flat to regain composure. To my regret I threw out the packaging, to later find, on several strips, the weather proof material was split through to the circuit board, and on two strips, the LED housing was protruding through the weather proof medium, unprotected. At twenty four dollars a strip this is unacceptable. I honestly think OZNIUM would better forgo the packaging camera in favor of inspecting their product more carefully before shipment. If you purchase these, I highly recommend you examine thoroughly before use. I just took for granted I would get the same quality this time. My last order.

They are super bright on my car, work perfectly, and look really good, even better than you'd imagine from the pictures. They dont flex side to side much when looking at them from the top but that wasn't an issue for me. And also the other issue is the sticky backing doesn't hold completely, but that's probably my fault from the way i applied them, and they still stay perfectly in place anyway. Good wide viewing angles. Definitely recommend

What is the difference between these and the other waterproof strips? Is the brightness that much more noticeable? I want to get a couple red strips for addition brake lights.

I really wanted to add a distinctive look to my Yaris without shelling out a wad of cash! These LEDs look awesome and were quite easy to install!

These strips are very bright and can be seen well even in daylight. Comparable to the Audi lights and other luxury car lights you see on the roads. Wiring was easy to install. Keep in mind: you cannot plug these into your home outlet to test the strips as it will fry the internal wiring of the strip. You ALWAYS must use a converter for in-home use. These strips are designed to plug and play within a 12V DC application (ie Auto). As always, Oznium is quick to ship and has excellent customer service.

I want to glow up my 2010 Charger so I, having never bought from Oznium before, bought these because I heard it was an excellent product. I can say that this thing throws a truckload of light VERY evenly. You have to put these LEDs strips within 1 inch of a surface to get any kind of spotlighting effect. VERY flexible. I put the strip through a torture test of sorts. I live in Arizona so my first concern was the silicone and how it would stand up to the heat of summer plus the heat of the engine as I would be putting these in my grill and engine bay among other places. They passed the test with flying colors. The only thing that was a con was that the adhesive backing isn't on par with the awesomeness of the rest of the product. Not a big issue for me because I was planning on zip tying them, but it may be for others.

Long story short, these lights are incredibly bright and rugged. If you plan on using ONLY adhesive to secure them, however, don't put too much faith in the included adhesive backing.

I bought the side emitting with disappointing results, I bought the water proof ribbon with disappointing results. I bought these and WOW. they are brighter, they give MUCH more of that Audi look.

Pros-waterproof of course, bright as hell (brighter than the other 2 strips..no joke), last longer, simple connect wires and go.

Cons-not long enough, need to make side emitting, the wires stand out when trying to do a nice clean install, don't flex side to side, just up and down (when looking at the strip from the top).

Overall, worth the money by far.

Have a spa with 100-104degrees fahrenheit. Installed led strip and within 2 weeks the leds start going out due to delamination from between the slicone and black electric strip. Installed under the waterfall, and it is truly beautiful. It just keeps going bad. The strip is above the water and has a thermal blanket barrier, but the steam is causing the problem. Need a heat and waterproof led strip.

I purchased my strips several months ago. My strips were very easy to work with (soldering the lead wires and attaching them with the 3M adhesive). I used my strips in place of my fog lights. Just the other day one of the single LED's went out in one of the strips. So...overall I think the product is only OK although I am not happy about the LED going out. I am removing both strips now and looking for replacement strips. Grade for the product is a "D"!

###
Note from Oznium.com:

I'd say only 1 LED out of 36 burning out after 11 months isn't too bad, especially since they were exposed to the elements on the front of the car.

Anyways, as you know, the free replacement is on its way.

(Also, this review is mis-classified. You didn't actually buy this product, but rather this one)