Neo-wedge LED Bulb - For Corvette C5

All Customer Questions

Question

Can you yank the LED out of the resistor? - by Billy (Los Angeles)

Answer

Yes, you can dis-assemble this if you'd like.

Question

Can you tell me what the rating and size of the resistor is? - by Rick

Answer

This bulb has a 470ohm resistor in it.

Question

Do you also make them in the slightly smaller size which is found on the HUD control panel to the left of the instrument cluster in a Corvette? I can't remember if www.spdkilz.com shows this, but for some reason there is a smaller bulb on that side.
these bulbs are used in the DIC panel, door control panels, the Traction control/active handling panel, and foglight/hatch/trunk panel. this is a perfect project to get rid of the old looking yellowish incandescent bulbs. do you know if these light up the TC/AH panel well though? I've heard complaints that other commercially available LED 74's don't provide enough light in this one location.

Answer

Sorry, just the one size.

Question

2 questions. What is the diameter of the base ,and what is the height from base to tip? The Scion xB uses a 10mm base and 13mm height

Answer

Base = 9.50mm
Height including bulb = 10.20mm

Question

Are these 12v?

Answer

Yes

Question

If used in the cluster can these bulbs be dimmed just like a regular bulb? - by Raymond (St. Paul, Alberta, C)

Answer

Yes, you should have no problems dimming them.

Question

2004 Chevrolet Corvette Z06...4 on the drivers side and 2 on the passenger side, correct? How about the other bulbs in the instrument cluster, it looks like (without taking it apart) that there should be 2 on the heads up display, 1 for the HUD 'page' button and then 2 -4 on the computer buttons. Any idea? - by Mitch (Heath, TX)

Answer

We have no idea how many 74 wedge bulbs are in the Corvette. Sorry, but we don't have one to take apart and see for ourselves.

Question

Is the 74 base type the same that fits in gauge clusters in a Ford Focus? Though the Pictures are blurry this is a Forum on the Mod I am hoping to do. http://www.focusfanatics.com/forum/showthread.php?t=134217 - by Kevin (Lynchburg, VA)

Answer

It is very unlikely that our 74 bulb will fit your application, as they were designed specifically for the Corvette. You can always try, but we're not responsible if they don't fit.

Question

Does the black mount come off? Cuz i'm certain it does so i can fit it in the cubby hole for a scion tC just want to make sure it comes off. let me know thank you phil :)

Answer

If you'd like you can remove the LED from the plastic holder.

Question

is 74 the size/type of the "bulb" like 194, 168, etc.?

Answer

Yes.

Question

what kind of connector is on the end? is it a 2 wire connection or does it have a plug attached?

Answer

It comes exactly as pictured:

Question

Can these be used in other cars or is it only for Corvettes?

Answer

They may be able to be used in other cars, we do not know for sure. Buy them and see, if they don't fit send them back for a refund.

Question

Are the LEDs used 3mm or 5mm?

Answer

They are actually 4mm!

Question

will these lights fit into my center accessory on my Scion XB? - by Shawn (Corona, CA)

Answer

I don't know. Please take a picture of the bulb and then I can probably tell you.