GSW-45 Rocker Switch - Scion OEM Style

All Customer Questions

Question

I installed it on my after market fogs and my fuse keeps blowing. tried several amps but nothing seems to work. the swtich i bought has on/off and three prongs on the back. the switch lights up before i try switching it on then it blows when i do.

Answer

Please check your wiring, and make sure the fuse you're using is properly sized for the current draw of your fog lights.

Question

Since there are only two prongs (running the positive wire), does that mean that it does not need to be grounded (running the negative wire)? - by Albert

Answer

Only the light up version needs to be grounded.

Question

My car isn't listed on the product page. Will this switch fit my car? - by dan (texas)

Answer

If your switch is NOT mentioned, then we do not know if it will fit your vehicle. Please try measuring the opening to see if the switch will fit, or just buy it and try. You can always return it if it doesn't.

Question

What is the size of the rectangular hole the switch fits into? - by Jerry

Answer

Recommended mounting hole: .830" x 1.450"

Question

I see that this switch does not fit the 2008 xb, are you going to come out with some? or do we have to do some customizing?

Answer

Sorry, but we have no plans to make a switch for the 2008 xB. You can always use another switch though. It just won't fit perfectly in the stock location.

Question

do you have the diagram for the back connectors..will it match the US stock harness connectors with yours or will i have to re wire it? 2006 scion xb. this is for the fog light

Answer

Diagram for what? There's just 2 prongs on the back of the switch.

It will not match any Scion harnesses. Either solder your wires, or use .250" spade terminals.

Question

Is the momentary switch available in an "on-off-on"? - by joel

Answer

No. The momentary switch is only available in an "on-off".

Question

can you show a wiring diagram of which wire connect to which prong on the switch?

Answer

There's just 2 prongs and it doesn't matter which prong you connect to. They are both the same.

Question

What is a momentary switch?

Answer

A momentary switch means that it is only connecting the circuit while you hold the switch - the rest of the time the circuit is not connected. When you let go of holding the switch in the "on" position, it will automatically jump back to the "off" position.

Question

About how many cold cathode kits can be hooked up to one of these switches? - by Nick (Cedarburg, WI)

Answer

Since the switch is rated for 20 amps and each cathode kit draws .7 amps, just divide 20 by .7 and you will find that you can use around 28 cathode kits on this switch.

Question

On the Scion xB do these fit under the compartment under the radio?

Answer

Yes!

Question

What is the on/off/on switch? Does it perform like the front map light switch in the Scion tC ? - by vietboy (Iowa)

Answer

The on/off/on switch has 3 positions. It has two different On positions with a center Off. Yes it performs like the front map light switch in the Scion tC.

Here is a circuit wiring diagram: