LED Holders

All Customer Questions

Question

so the superflux will fit the 10mm holders? - by Max (Daytona Beach)

Answer

Yes

Question

1)Do the LED holders come with a lens?
2)What size holder should i get if i want to fit a 5 mm prewired LED - by allen (rosemead)

Answer

1)The LED Holders do not come with a lense
2)The 5mm LED holder will work perfect with the 5mm pre-wired LED's

Question

What's the recommended technique for using the 2-piece plastic holder? I've tried putting the LED in the holder first, then pushing it into the hole (from the front) then sliding the ring down over the leads, and pressing it over the "ears"... Is there a better way? - by Joe

Answer

The way that you have described is the way I have personally installed all of mine.

Question

How large is the mounting hole for the 10mm chrome holders? (The 5mm ones are 7.69) Is it 12.69?

Answer

12.91mm

Question

I'm interested in the Superflux Prewired LED's Do you have any mounting holders to fit them? Or do they already have a "mounting holder" built in? Thanks! - by Kevin (Lynchburg, VA)

Answer

You can use the 10mm LED Holder for the Superflux pre-wired LED's.
They recess a little bit into the holder but you don't lose any spread.

Question

I need sealed mounting LED's on the front panel - by Mladen (Serbia)

Answer

We don't offer any sealed mounting options. You will have to seal them yourself using some sort of silicone or similar product.

Question

I want to mount some 5 mm prewired LEDs into some 7 mm holes on the underside of my hood.

1) Can the chrome holders be used with prewired LEDs?
2) Can these holders be used in a 7mm hole? - by Aaron (Fort Wayne, IN)

Answer

The chrome holders can be used with pre-wired LEDs. While the holders are intended for non pre-wired LEDs, they could easily be secured with glue.

Question

Will the pre-wired LED's fit in the plastic one?
- by Josh (Baltimore, MD)

Answer

Yes

Question

I am having a difficult time finding a drill bit that will fit these holders to securely hold these led holders. Do you know the size hole that is needed for these?

Answer

I don't know off hand. Whenever I install them, I just open up my set of drill bits, get a piece of scrap wood or plastic, drill a few holes, and test the fit.

Question

I have a 1/4" panel, that I would like to use the chrome 5mm led mount. What is the mounting depth of the chrome mounts??
Also is there a discount for volume orders? - by Chris (Waukesha, WI)

Answer

It will certainly fit in a 1/4" panel. Depending on the quantity you order, we can give a small discount.