StreetGlow Multi Color Wheel Well Kit - Customer Questions

how is it powered? battery or wired? - by jeff (fort lauderdale)

You will wire this to your car's battery or a fused source in the car

i saw some adding the flexible wheel well arround the rotor as a circle but i wanna know how because it cant be on the rotor bc there is a break (caliber) so what u think? - by Tee (evansville, in)

You will be attaching it to the top of the wheel well not the brake/rotor assembly

Are the flexible lights/led strips just as bright as these? - by Russell (Broadalbin, NY)

The Flexible LED Strips will be brighter

Whats the difference between this kit and the other one on your site, Do they both come with everything you need to install them.

Different patterns. Different types of tubes. Different LEDs. Different remote setup.

Both come with most things necessary for installation. You may need extras depending on your vehicle.

Is there a mode where you can turn them off or will they always have to be on?

You can wire them up to a switch to turn them off and on as you like

is there anyway I can hook it up to my deck so it flashes with the bass kinds thing?

We do know that the Streetglow underbody kits have what they call "Sound Activation Mode".
I don't think the Wheel Well Kits have the "Sound Activation Mode".
I checked Streetglow.com, they don't mention whether the Wheel Well Kits have it or not.
Maybe give Streetglow a call at 1-800-Streetglow or visit their website.
http://www.streetglow.com

where do the wheel well kit be place in the inside of the rim? - by kenneth

Since each vehicle is different, it is best to experiment with different mounting locations until you have achieved a desired effect.

are they illegal to drive with them on in the state of florida????

We cannot answer that. Check your local laws or ask your local law enforcement.

how would i run the wiring for the wheel well to the little box inside the car?? and where do i hook up the littl black box??

Run the wiring away from moving and hot parts, under the car and through any available grommets into the interior of your car. The little black box gets hooked up to a positive and negative power source, such as the battery. Installation instructions and hardware come with the kit. If you are not familiar or experienced enough, seek professional assistance.

I didnt get any typ of fuse with this when i bought it...should i buy a inline fuse? do you sell them if so where can i buy it from you?

https://www.oznium.com/install-bay/atc-fuse-holder

what size / type of fuse would you use with this kit?

A fuse is supplied with the kit. If you wish to use your own, just use a fuse with the same amperage as the one the kit comes with (most likely 2-3 amps).

Does that kit do all four wheels?

Yes

Can these be controlled using the UFO underbody kit? And if so, is it the full level of control as seen in the tubes of the UFO kit? - by Phibes (Lakeland, FL)

There is absolutely no compatibility between these and the Iceled UFO.

Is there any drilling involved to install? And what about hooking up to the electrical system, how's that done?

It is possible to install without drilling. You could just use cable ties to mount the tubes. Be creative! If you have to drill though, it is not the end of the world.

The best way to power the LED lights is by hooking up directly to the car battery. Installation instructions are included with the kit.