These Waterproof Ribbon LED strips are designed for use in an environment to protect against water and other elements. These LED Strips are built on a flexible circuit board allowing you to bend and twist in just about any direction. Each Ribbon LED strip comes equipped with a 3M adhesive backing and can be stuck just about anywhere.

These strips are amazingly bright and are available in blue, green, red, 3 shades of white, amber, and a million color version!

These 12-volt-ready Waterproof Ribbon LED Strips are sold in pre-wired lengths with power connectors on both ends so you can easily daisy-chain them together. No soldering required. The wires are already attached to the strip - simply plug and play!

Need to make it shorter? They can be cut every few inches (or between every 3rd LED). The all-black circuit board offers an elegant aesthetic, especially for installations where the strip may be directly visible. Each end has pre-attached power wires. You only have to hook up one end. The other may be used to extend the strip. Simply plug another one in! Hook the wires up to your 12V power source. One is indicated with a white stripe, for positive, and the other is all black for negative. You can easily connect multiple strips of any length together by plugging them in together with the quick disconnects.


Our strips are not only used by car enthusiasts! They are used for lighting projects by designers, developers, inventors, home owners, and if you have a creative application for these please don't hesitate to contact us for support. We're constantly working with many professionals to turn their ideas into a reality.

These LED's are very bright with a wide viewing angle. They will keep your electricity bill low as they draw very little power. They are extremely efficient and will not waste energy as heat, meaning you don't have to worry about fire danger and will not have to fight the extra heat emissions with your air conditioner. This is another benefit with our extremely bright LED's.

What does each white version look like?



The 2-pin plug version of RGB strips will be phased out soon. The 4-pin version is now available.
Instead of having 2 x 2 pins power connectors, we use 1 x 4 pins waterproof connectors which let you be even simpler and easier to daisy-chain the strips together. On the 4 pin style, please make sure the ARROWS are facing each other when connecting strips to each other or to an extension cable.



Using the RGB/Million Color style?

These lights don't change color on their own. You'll need to hook them up to an RGB controller.
- Our Freedom RGB Controller is a popular option

Now we offer Waterproof 1-to-8 Y adapter for you easy to power more LED strips.