12V Dimmer and Strobe Remote Switch - Plug & Play!

All Customer Questions

Question

Okay this should be a good question. I have a set of dual color halos for my Chrysler 300C (Red and White) if I want to control the white separate from the red, and I buy a second control box, will it be on a different frequency or will it wind up being the same, meaning one remote will trigger both boxes at the same time (not what I want to do) I want to be able to strobe the white and the red out of phase with each other.

TIA,
Brett D. - by Brett (Greensburg, PA)

Answer

Seperate

Question

Can u control two seperate led strips with one remote? - by sean

Answer

Yes, they will be doing the same actions

Question

I one question about the voltage, on my bike I have about 14.7 volts when running. Would it be a problem to have the volts that high or would it burn out. - by Kevin

Answer

Should be OK

Question

Is there any chance of failing LED or damaging LED during continuos dimming? - by Madan (L&T, India)

Answer

Question

can it be used on factory head/tail lights?

Answer

No
They are designed to be used with LED Products

Question

Where would the antenna wire go if I installed it to control led's in my computer or would I not need it at all? - by Kenn (LKG)

Answer

You don't hook the wire up, it is the antenna for the radio remote.

Question

i have the inferno v2 i wanna hook it up 2 it how is that done, the inferno only has a - and + wire, and the device has those wires also, but they also have a ant wire and led wires - by eddie (chicago, il.)

Answer

These should NOT be hooked up to the Inferno V2 or any other body kit with an ECU. The underbody kit requires full power at all times for the brain and controller. LEDs, LED Strips, and all others are fine, but this product isn't meant to dim body kits. That's why they have their own ECU built in.

Question

Its mentioned "6 Strobe / Flash modes" but the video you have as an example only shows 1 strobe mode. Is this a upgraded model?

Answer

Strobe modes are considered (2-8 Flashes Per Mode) - The particular reviewer only showed 1 strobe mode. We assure you this has 6 different strobe cycles!

Question

If i were to use this with an underbody kit and get the power to go threw first the strobe box then to the control unit, to use its dimming or strobe feature. Would that work?

Answer

It is NOT recommended to use these with under body kits. Any other LED will be fine, but Underbody kits are not recommended to be used with this product.

Question

If you are using million lights, will this contoller stop on 1 light? or does it just affect the brightness of all the lights? - by Russell (Broadalbin, NY)

Answer

It will affect only the brightness, it is not an RGB Controller. You could use it with a controller though!

Question

does the strobe feature alternate between say like left and right or is it just all strobe at once - by bryce (Fort Wayne, IN)

Answer

It is all at once

Question

How many channels does this control? - by Mahmood (Bahrain)

Answer

Question

Can I use this with a few Beefy LED Strips? - by matt

Answer

Yes. This will work great with any of our LED strip products including the popular Beefy LED Strips.

Question

Is it possible to wire this unit to 3 position toggle switches so that you can can control how many lights are controled by this unit or just turn on some lights direct from 12 volts? (Example: center pole of switch to led the other 2 poloes would go one to this unit the other to a 12v source this way you could control how many lights are dimmed/strobed and how many are off or on, with each led having a switch hope I made this clear) - by michael (Gresham, OR)

Answer

Yes, that is certainly possible. For assistance wiring this custom circuit, please consult the forum.

Question

So this will make any LED its hooked up to strobe and dim? For example, LED Modules, Piranha Bars, Cold Cathodes? - by Blaine (santa rosa ca.)

Answer

Yes, pretty much any LED product!

We don't recommend using this with cathodes though, as cathodes need a constant 12v, and the dimming function would burn them out quickly.
Also, the dimming function is limited with our High Intensity LED Floods & Spotlights.

Question

It is waterproof enough to use on a boat? - by michael (Gresham, OR)

Answer

It isn't waterproof at all, but you could still use it on a boat if you're careful to install it in a dry location.