GSW-45 LED Rocker Switch - Scion OEM Style

Just like our Scion OEM Style Rocker Switch, except this one lights up! Comes with a built-in LED that glows when the rocker is turned to the "on" position.

Available in three colors: Red, Green, and Amber.

This rocker switch fits perfectly in the switch "blanks" in your Scion xA, xB, or tC. Just pop out the blank from the back, wire this switch up, and pop it in place. It looks completely stock, and will give your car a very clean look. Use it to control interior lights, fog lights, amplifiers, or anything else!

Rated at least 20 amps. Recommended mounting hole: .830" x 1.450"

Sometimes they'll come with .250" spade terminals. Other-times they may come with screw terminals. It just depends on the batch we get from the factory. Either way, connecting wires is a cinch.

Wiring Directions:

On the back of the switch next to the connectors, there are small numbered markings.

#2: 12v Positive Source (IE battery, fuse block, etc)
#3: 12v Accessory (12v+ to your lights)
#4: Ground (for the LED on the switch)

Still confused? Check out a wiring diagram.

Also fits in many other Toyota's and Lexus.

Confirmed to fit perfectly with no modification:
✓ Lexus IS300
✓ 96-02 Toyota 4Runner (sorry doesn't fit 03+)
✓ Toyota Celica (7th gen, 2000+)
✓ Toyota Matrix
✓ Toyota Tacoma
✓ Scion tC
✓ Scion xB 1st gen
✓ Scion xA

Fits with slight shaving:
✓ Lexus IS250 & IS350
✓ Toyota FJ Cruiser

Does not fit:
✓ Toyota Highlander
✓ Scion xB 2nd gen (2008+)
✓ Scion xD (2008+)

If your switch is NOT mentioned above, then we do not know if it will fit your vehicle. You should try measuring your opening to see if the switch will fit, or just buy it and try. You can always return it if it doesn't.

Customer Questions?

Our customers have asked 16 questions about this product.
→ Read common questions and answers.

Reviews

4 Star(s) Please update. Does not fit 05+ Tacoma | Aug 03, 2008

Reviewer: Jeffrey Kim (Cerritos, CA)

I've been looking for a switch to fit my 07 Tacoma and I was so happy when I found this switch that supposedly fits Tacomas but when I finally got it, no matter what I tried it wouldn't get into my Tacoma. I ended up having to shave my dash -________- The screw terminals are a real pain too.

5 Star(s) Does Fit 03 4Runner (with shaving) | Jun 18, 2008

Reviewer: Jesus Rolando (Laredo, TX)

I just bought two switches for my 03 4Runner SportEdition, said it didn't fit but I figured I would give it a shot and sure enough I got both into the center console with a little shaving but they look great

3 Star(s) Great switch, fit perfectly, but LED didn't light up? | Jun 15, 2008

Reviewer: William (Westchester, CA)

I wired everything in as instructed, the switch works, looks great, and fits perfectly, except the LED didn't work for some reason...

4 Star(s) Nice Gardner Bender switch | May 28, 2008

Reviewer: Jon D (San Diego, CA)

Mine came with screw terminals not spade terminals as described in the product description. It's not a big deal to me since IMO is provides a more secure connection, however some may not like this. I recommend you update your product description so people at least know they may not get exactly what they have ordered.

===
Note from Oznium:
Oops, sorry about that. Good idea - I'll update the description right now.

5 Star(s) Great | May 24, 2008

Reviewer: Sam J (WI)

Works and fits great in my 05 scion Xb. Glad I chose to get the switch with the light as it really helped me to know it was hooked up correctly.

If only it came in blue though.

4 Star(s) Perfect! | Apr 23, 2008

Reviewer: Doug (Richmond, VA)

I popped this into the dash of my '05 Scion tC. It was effortless and much easier than I thought it would be.

4 stars only because I wish more colors were offered, namely blue.

2 Star(s) 2008 XB | Apr 05, 2008

Reviewer: Martin (Elkridge, MD)

I bought 3 of these. Thy do not fit at all. You need to clarify your applications that they do fit.

===
Note from Oznium:
Sorry for any confusion, but the application list clearly states that they do not fit the 2008 xB.

4 Star(s) Does not fit 2005+ Tacoma | Nov 19, 2007

Reviewer: Robert (Orange County, CA)

I was excited to find someone who had a rocker switch that fit into a Tacoma, unfortunately when I received mine, it was a little too large for my '05. You might want to update your description. Otherwise it was very high quality, something I would be very happy with in my truck. The only improvement I could possibly think of is the click sound it makes when engaged, could be softer, but thats just me being picky. =)

4 Star(s) nice switch - wiring notes - 1997 Tacoma | Sep 25, 2007

Reviewer: Richard (Orinda, CA)

The descriptions says you can use .25" spade terminal connectors, but not true for mine. It came with screw terminals; spade connectors did not fit even with the screws removed, and the screw terminals are too small for 14g wire. I crimped on ring terminals to my wires for a secure connection. Otherwise it is a high-quality switch and fit perfectly in the dash blank on a 1997 Tacoma truck.

===
Note from Oznium: Sometimes they'll come with spade terminals, sometimes they'll come with screw terminals, it just depends on the batch we get from the factory. Sorry for any trouble!

Write an online review and share your thoughts with other customers.

Upload your own action shots - show us how you creatively used our product.