Quite thin, and easy to mount.
1000 lumens.
9 x 3W LEDs = 27W total.
Draws about 1.2A of power @ 12VDC.
Can be powered by any voltage from 10v to 30v.
Features:
1. Die-cast aluminum alloy housing = waterproof, good heat dissipation, and durable!
2. Glass lens is made of quartz to ensure tons of light transmission.
3. Easily withstands water, dust, and vibrations = IP68
And the best benefits:
1. Light transmission is much stronger than with normal halogen bulbs.
2. Runs cooler than normal halogen bulbs.
3. Longer life, so you don't have to worry about replacing it.
Applications:
This LED Work Light has a ton of uses. For example: auxiliary lighting on cars, trucks, tractors, vessels, buses, off-road vehicles, fire engines, forklifts, mining vehicles, trains, tanks, etc.
LED Work Light
27W LED Work Light Photos
Action Shots
27W LED Work Light Technical Info
| Connection Type | 2 black wires |
| IP Rating | IP68 |
| Maximum Power Consumption | 27W |
| Operating Voltage Range | DC 10-30V |
| Net Weight | 850 g |
| Over Dimensions | (L)65.5mm x (W)109.5mm x (H) 127mm |
| Extended Wire Length | 140mm / 5.5 inches |
| Color Temperature | 6000-6500K |
| Lumens | 1000 lm |
Intensity Distribution
Illumination Distribution
Customer questions & answers
What is the range of motion on the mounting bracket? (ie all the way forward to all the way back) I'd like to use this on a tractor ROPS and mount the bracket on the forward side of the bracket so if it's tipped all the way back it shines forward or all the way forward it shines towards the backhoe.
Full range of motion, all the way forward and all the way back.
Will Excess wiring needed to be purchased if they are being mounted about 6 feet from the power source? - by Josh (Powhatan, Va)
Yes
I have 8-6volt bats on my golf cart --- What brightness/life expectation changes will I encounter with 12V, 18V, 24V, 30V hookups --Also, with 30 V wiring, I actually will get up to 32.5 with full charges ----- can the light handle that? - by Gale (The Villages, FL)
Operating range is 10v to 30v, you will have full light within that range. 50,000 hours. I would recommend am inline fuse if your power spikes to 32.5v.
Customer Reviews
Lights for my Jeep
William Ellison from Phoenix, AZ
I was really excited to get my six light from Oznium. I was backing up in a parking lot and ran into a car coming down the isle. I didn't see him and he did not see my back up lights. Now everyone see's me backing up. I installed led backup bulbs in my tail light to reduce the amp draw as not to blow fuses. I also have four of these lights up front hooked into my fog light switch. I am really surprised about the light they put out and the quality for the money. Oznium has never let me down on all of my purchases. Thank you.