ICELED Zap+ Controller

Iceled Zap+ is a compact controller with some very powerful features. It provides even more control of Iceled light sources than the built in stand-alone mode of each light.

With just two buttons you can dial-up any static color, produce a phasing color sweep, have colors beat to the music (using the built-in microphone), or create a strobe effect with a variable flash-rate.

- Standby/Bypass Effectively turns off light-sources by blacking them out or passes through external Iceled data if present
- Static color Provides fine-tuning of any particular hue or shade
- Phasing color Automatically creates smooth sweeps through one of four different color ranges
- Beat to color Sequences random colors in time with an audio beat, with adjustable fade-out
- Strobe Produces maximum intensity flashes in time with an audio beat or from an adjustable time-base

Settings for each mode are stored in a non-volatile memory. You can disconnect the power and not lose your settings.

Zap+ Controller Connections
The junction box is connected to power/ground and has a standard Iceled three-way terminal block for connecting to the light sources. The wired remote is a small hand-held unit measuring 58 x 36 x 16 mm, with 5 status LEDs.

The input lead also has a data-in wire that can optionally be run to UFO or ZEN allowing Zap+ to pass this color information through to the connected light-source(s) if desired. So, apart from having the option of synchronizing interior lighting to UFO, it is also possible to 'Zap' a light-source with an alternative effect e.g. to strobe an individual ZEN zone - or even a tube connected to a UFO channel.