Scion xB Front Bumper Vertical LED Running Lights

The standard toyota fog lights for the xB are hideous if you ask me, these are perfect and soooo meant to be on this car! We've swapped out our tail light for LEDs and that was an easy install, these were a bit more difficult only because we are not very oriented in taking apart cars and splicing wires ;)
We found it easiest to remove the front bumper (even though that was not easy since we had no idea what we were doing) but once it was off it was super easy to attach the new lights to the current headlight wires using a easy splicing wire connection kit that was only a few bucks. The lights snapped in tight and fit like a glove! We were just outside taking photos and we had multiple people driving by who actually stopped and started asking about the lights! They are HOT! I would recommend every xB owner buy these ;)

I got mine in 3 days, and it was so simple to install it took longer to actually jack up my front end (mine is lowered 2") than it did to install these, and then i decided to hook mine up to the turn signals but I may change that to running lights so that they are on with the lights all the time, I was going to hook them up to the fog lights but after seeing just how incredibly bright they are I wanted to show them off more often. I would say these are comparative to the stock headlight bulbs in regards to illumination. They come with more than enough wire, I would only recommend possibly including some wire taps or quick connects (?). But I honestly couldn't write anything negative if I tried or wanted. Possibly in the future could we hope for different colors..? (amber,red,hey blue and U.V. would be great)

this has to be the coolest product for a gen 2. the description is right when they say they take some muscle to put in. but they do snap right in and are held very secure and are quite easy to wire up. its suggested you take off the bumper and i also recommend it. it makes it easier for the instilation. also if you can get a buddy to help trust me it helps. the tend to want to snap in one certain way. as for removing the bumper i also found this was quite easy. there are alot of screws but the bumper comes right off and goes right back on perfectly with no hastle whatsoever. when you pull on your bumper on the sides. dont be afraid to add some muscle to it. as the clips on the bumper on either side are quite securly held in place but they do pop off and back on perfectly. so have fun these are bright and are just awesome. thanks alot phill.

Putting 'em in was stupid easy and took less then an hour! All you need is a ramp, size 10 sockets, some plugs and...that's it! The ONLY thing that I though was a drag, was having to spend $65 bones for a switch (pure OEM) from the Dealer. (worth it though)

Looks like thay belong on the car, looks bada$$ and NO other car on the road has anything like 'em! Definitely worth it and a MUST for XB drivers that want to make their XB stand out!

So I have had these since the day Oznium decided to make them. I was 1 of the lucky few who got the 1st sets of these bad boys and Im really glad I did!

These things get a ton of attention and really set off the front end, especially mixed with some 6K HIDs in the lowbeams.

This weekend I noticed a few of the LEDs had gone out and a couple were actually strobing (I dont have strobes). So I opened a replacement request and before I could even wonder when it was going to be looked at I had a replacement set in the mail. Oznium knows how to take care of their customers, and definitely backs up their products 100%! Thanks guys.

I got these quickly and they weren't hard to install. I decided to take off the bumper and install them that way. Just take out the stock grilles and then insert the new ones. You have to push to actually get these in but they fit perfectly. I wired mine to a rocker switch so I can turn them on and off as I please. Although they can't be used as regular headlights, they are still bright when you look at them. These aren't the regular ugly ones on ebay and there isn't any drilling involved. I highly recommend these! Also, they aren't blue as you see in the images. They are a crisp white, about 4-5K.

chicks love em. that would definitely be the best thing about getting these lights. If you are looking for actual fog lights, these don't really help, but honestly, I did not get these because of the abundance of fog in Arizona. Get them because they are hardcore and cool and awesome! 20 bright LEDs in each definitely get people's attention, especially other xB drivers because they know that they special. These things are sealed good and are totally made to be able to take rocks and rain and whatever else the front of your car encounters on the highways.

And the pride you get of installing them yourself is unreal. Installation is not that difficult either. Removing the wheel well is the easiest way to do it. There's a few screws (no match for a 10mm wrench), a quarter turn pin, and a bunch of push pin. If you don't know how to remove them, dont worry cuz google's got your back. Then just splice into your parking lights with some weather-proof t-taps from autozone and boom your done!

And as usual Oznium being a boss with fast delivery and crazy good customer service with a great warranty. If you like your 2nd gen xB then get these and you'll like your car even more ;D

These lights are amazing. They fit like a glove and install so easy. I ended up removing the bumper and using the fog light wires already run to install mine, but will probably change that around once I get fog lights and the strobe switch for these. Yes, if you own these, BUY THE STROBE SWITCH! it looks amazing. If you're looking for a nice easy mod to add a lot of flare to your ride, this is what you want.

Pretty easy to install. You actually do not have to remove the bumper cover to put in. I went thru the wheel well and was much easier. Did take some muscle to snap in but fit nice and snug once cliped in place. Ran the wires up to and just spliced into the parking lights. Looks just simple awesome. If you have access to a jack it would be easier to remove the wheel on the side you are working on to fold the inner liner back. Looking into the future where poss oznium will make other led colors avail and poss a tinted version. Great job making these. Anyone who asks where I got them I will be sure to refer them. Thanks

Mother-in-law got these lights for me for Christmas (pretty cool huh!) and they were backordered so I just got them today. Install took about 2.5 hours by myself. I decided to take the entire bumper off cause I thought it would be easier since I don't have access to a lift. Getting the radiator guard, grill, and bumper off was a breeze. The only real difficulty was getting the lights into the existing holes. The Scion clips just wouldn't wrap around the light clips. Long story short it took more time to get the lights in than it took to take the care apart and put it back together. Honestly though, it was a pretty fun thing to do on my day off!

For the actual product: Oznium gives you plenty of wire so you don't have to buy more. There were no instructions but with only a red (power) and black (ground) wire coming from the lights and with the pics posted by other users it was pretty easy to figure out what to do. I actually cut the green headlight wire and used wire butts to connect the power with the green. I did the same for the ground wires and then pushed the wires back into the wire tube. Also, I used zip ties to tie all the wire together so it isn't flapping around in the bumper. Install was a breeze and the lights work perfectly. They look awesome!