12V Delay Timer Relay

NEW for 2018: 12V Delay Timer Relay
Two versions are available: 0-10 seconds and 0-999 seconds with digital screen.

When the delay timer gets triggered, it will start to count down based on the time set.

0-10s delay timer:
- Can be set between two LED lights
(When the power supply is connected, LED light A will turn on; After few seconds (0-10s), LED light A will turn off and LED light B will turn on) ⇒ more details on below video.

0-999s delay timer with digital screen:
- Wide range of time slot can be set
- Clear screen display to show the countdown time
- Best when used with a momentary switch ⇒ Bi-color Anti-vandal LED Switch

♦ 0-10s Delay Timer Relay

♦ 0-999s Delay Timer Relay

12V Delay Timer Relay Photos

0 to 10 sec programmable delay relay time

12v adjustable delay timer relay trigger input output

Program the 0 to 999 second delay relay time

12V Delay Timer Relay Technical Info

0-10 seconds:

Input Voltage: 12V

Operating current: 16mA

Count down time range: 0-10 seconds

Dimensions: 68mm x 22mm x 18mm

Weight: 19g

High precision: 0.01% discrepancy per second

0-999 seconds (with digital screen):

Input Voltage: 12V

Operating current: 13-19mA

Count down time range: 0-999 seconds

Dimensions: 65mm x 36mm x 19mm

Weight: 26g

High precision: 0.01% discrepancy per second

Here's how you can use the timer relay to delay the turn off an amplifier in a car stereo setup.
You can use either the 0-10s or 0-999s relay's with this wiring method.

Only 12 in stock

Style

Quantity

$25.89

Want it delivered Sunday, November 3? Order it in the next 16 hours and 40 minutes, and choose One-Day Shipping at checkout.

Customer questions & answers

Question:

On the 0-999 unit, if the 12v in is constant power, will it drain a car battery when not in use? Also, is there a way to turn off the display, other than removing power?

Answer:

The relay uses almost no power in off mode, it will not drain your battery. There is no way to turn off the display.

Question:

I want to have a delayed timer relay for up to a minute of time then turn off power to an ignition switch. the main thing I want is to turn off the timer delay with the use of a hidden rocker of vandal switch. purpose is to allow a car jacker time to drive away and me to escape to safety in the opposite direction once the truck is started and unless the switch is engaged the time delay will turn off the ignition. I could use 3 setups. I was car jacked recently and mu son's truck was stolen last night and I have another truck I want set up before it is stolen or the driver is car jacked. Is something we can use your components to be integrated as anti theft / car jacking. I realize if the switch is off and vehicle is running they will not have any effect but I will incorporate a GPS tracker device too

Answer:

Please contact Customer Service at 800-245-8131.

Question:

can i use this to delay my LED blinker lights so i can delay them on and off and control the burn time on the leds? what i would like to do is just hold my lights on a little longer than the stock on and off flash. does thaty make sense?

Answer:

Would you be wiring the timer relay to your stock turn signal lights on your vehicle?

See more answered questions (19)

Customer Reviews

Write your own review

12V Delay Timer Relay

12V Delay Timer Relay Photos

12V Delay Timer Relay Technical Info

Customer questions & answers

Customer Reviews

About Oznium

Custom Design & Manufacturing

Customer Service

My Account