Tiny LED Modules : High brightness surface LEDs

All Customer Questions

Question

do you have anything like this that will run on a lower voltage? say 3-6 volts.

Answer

All of our products are 12v ready. 3-6volts might work, you may however have some brightness issues.

Question

Would these or the Thin Waterproof Ribbon LED Strip be better for the exterior door handles on a Scion tC? - by Austin (Johnson City, TN)

Answer

Thin waterproof ribbon strip has less height, and you can trim it down if necessary. We'd recommend those.

Question

could these work for wheel wells behind a rim to light it up a little bit?
i dont want a lot of light just enought to see in the rim at night. - by shawn

Answer

Yes, these will work great for that.

Question

I want to use the round one for a second dome light in the rear of my car will the 3m tape you provide stick the headliner or would I have to cut a hole the size of light to make it work. - by Joseph (Springhill, FL)

Answer

I think it will stick for a while. And if it falls down, you could always try mounting it in a different way.

Question

how for boat navigation lights? - by joe (toronto ont)

Answer

Sure, other boating enthusiasts use our Square or Rectangular Channel lights for that application.

http://www.oznium.com/rectangular-channel
http://www.oznium.com/square-channel

Question

Can you get the round light with out the houseing? Just the board and the wire.

Answer

I am sure it is possible, it would be "Special Order" thing.
We require an order of 1000 pieces or more for Special Orders.

Question

would these strips be bright enough to use as reverse lights in the day on my hot rod? (montreal)

Answer

These might be alright for reverse lights during the day.
But in full sunlight they may not be bright at all.

Question

do I need any kind of led modual or load equilizer to use the straight one as a license plate light or a motorcycle??? - by Kevin

Answer

Question

how long are the wires ( inches) that are on the straight ones ??? - by Kevin

Answer

The lead wires are about 6 inches.

Question

How many come with an order? One or an pair? - by Rainbow_xB (Stone Mountain, GA)

Answer

If you order a quantity of "1" you will get 1 module.

Question

what are the brighter...the led modules or cold cathode - by DENIS (Rochester, NH)

Answer

The Cold Cathodes are brighter and less expensive, but are very fragile.

Question

Ok so which would be brighter, one of the round modules or six individual super fluxes. The turn signal housings on my 95 cobra have black internals and no one can tell when I'm signaling so I was planing on a custom signal using one or the other LED set up (assuming both will work as turn signals) and was just curious which way would be the brightest. - by Charles

Answer

Six individual Super Flux LED's will be brighter, however you will have sufficient light with the round module and you will find the install to be much easier. I would go with the round module.

Question

Would these work as a directional signal wired in sync and mounted on the side view mirrors? Thanks!

Answer

Yes

Question

Would these be sutable for marker lights on a trailer?

Answer

Yes they'd be good for that.

Question

Do you think these will fit in the door handles on a scion tc? - by Sam (Miami Fl)

Answer

Yep, the straight ones will fit in the door handles on a tC.

I saw someone with an xB install them in the 4 door handles, and the result was fantastic!

Question

Alternators typically produce 14.4v (the 'running voltage' of a car). Won't these get over-driven the moment the engine starts?

Answer

When we say 12 volts, we mean they can handle the voltage the car puts out. It can handle 14.4v.

It will not get over-driven the moment the engine starts.

Question

Are the Yellow lights an amber glow or are they very Yellow - by Alex

Answer

They are amber colored. We have yet to see an LED product produce a genuine bright yellow color.

Question

Is the white color a Warm White, a Neutral White, or a Cool White?

Answer

The white LED Modules are a Neutral White.

Question

I have an alarm and want to tap your LED to my alarm LED. When I armed the alarm, it suppost to stay on for 15 seconds than flash. Your LED stayed on but does not flash with the alarm LED. Can you tell me why? Thanks.

Answer

You have a blinking LED as your alarm LED. When you hook 12 volts of constant power to it, the LED automatically blinks. It has a chip inside of it that makes it blink.

Question

thinking of stringing 10 of these together for 'puddle lamps'. what's the best way to wire them up? Would it be ok if I ran power and ground thru one main wire, and tapped into that main wherever I needed a module, or is there a better way? - by Breckenridge (Denver, CO)

Answer

There's no right or wrong way to wire them as long as they get 12 volts of power and ground. Do whatever is easiest for you.

Question

I was thinking about just adding these to my diy fender eliminator on my motorcycle. Would they be bright enought to add one on each side for turn signals or should i used 2 on each side? And also will they work as turn signals or do i need any thing else? - by shaun

Answer

1 will likely be bright enough.

They will work as turn signals too.

Question

Would it be safe to install straight up to rear blinkers or off rear blinker wires?

Answer

Yes

Question

Is there any way to wire these up to flash as if an alarm was activated by using an on/off switch? - by tom

Answer

Yes that is possible. You'd just need a flasher circuit. Something like this might work: http://www.oznium.com/cathode-music.

Question

Any chance the round one will fit in a rear view mirror map light?

What are its dimensions? - by Shaun (independence IA)

Answer

This picture gives you some idea about the dimensions.

Question

What is the length of the straight ones? - by Kim (Tyndall AFB)

Answer

The footprint of the straight ones is 2.36" x 0.43"

Question

Would this be a good product to install in my outer door handles? - by Mike (Ohio)

Answer

It is kinda thick. It will certainly work though.

Perhaps these would be better: http://www.oznium.com/thin-led-strip

Question

Are these brighter or softer compared to the Superflux LED's? - by Ira (Mercedes, TX)

Answer

These LED Modules are little bit brighter than the 4-chip Superflux LEDs!

Question

Are these sealed against moisture or will they need to be siliconed for an exterior application? - by Matt (Dublin, OH)

Answer

Sealed.

Question

Is the silver part metal or chromed plastic? - by Shaun (independence IA)

Answer

Chromed plastic.

Question

Does this item still run on 12vdc? - by Matt (Blue Bell)

Answer

Sure does!