Ultra Mini Pre-Wired Marine LED Flood Light

All Customer Questions

Question

What is the output wattage, 1 or 3?

Answer

Less than 1

Question

how are they used in headlights and in air vents in cars as seen in action shots? how do you get them to work in headlights without damaging headight and how do you get them in vents?

- by Bruce (West Allis, WI)

Answer

You've got to either drill a hole or wedge them in somehow.

Question

I am looking for a navigation light solution for a 16' sailboat. What is the viewing angle on these or is there another product that you would recomend. I have also been considering your Tiny LED Modules with 6 chips.

Answer

The viewing angle is around 110 degrees.

Yes, the tiny LED module with 6 chips would work well. Another good option:
http://www.oznium.com/marine-led-light

Question

i am needing more wire length to add the led's to the boat, can you recommend the correct wire cabling i will require, in terms of waterproof and ease

Answer

We recommend using 18gauge wire, its usually the hook up standard.

Question

will these cause any feedback which could interfere with adjacent electronics?

Answer

I have not heard of this, but if you are worried just work on moving the grounds around. That would fix any problem if one arose.

Question

What is the amp draw of the superflux 4 chip LED and the draw of 40 of them turn on at the same time.

Answer

Color Current
Blue 80 mA
Green 80 mA
Red 80 mA
White 80 mA
Yellow 80 mA

Question

Is there certain length behind the led that the wire should not/cannot be bent? I am going to be installing these into a pretty small area that would involve bending the wires directly behind the led.

Answer

They can be bent right behind the LED.

Question

How will this work on a 9V system?

Answer

Our Superflux 4 Chip LED's are designed to be used with 12V, if you use them with 9V they will not work properly, and will not be as bright.