Highlight your custom wheels with a brilliant cloud of super bright glow!

All Customer Questions

Question

can u drive with these on? - by krista (madras oregon)

Answer

We don't advise it. Check your local laws or ask an officer to know for sure.

Question

After reading the post I understand the wheel well kit does not link to the V2 like originally planned. What if I take the 4 tubes from the wheel well kit and put them in another V2 ECU and link those 2 (v2) ECU's together? would they then work like originally planned?

Answer

There are no linkable features between any of the V2 ECUs. Your best option would be adding the 6" tubes to the Inferno ECU - it will duplicate the first pixel of the tube as explained here.

Question

How many amps can this kit handle and/or how many tubes can you add onto it. - by Jordan (Selma, AL)

Answer

The maximum amperage of the ECU is untested, however it should be safe to handle at least 6-8 tubes. You can add an unlimited amount of tubes by using your own power source instead of the ECU's terminals.

Question

In regards to the 2 ww kits question below. I want them all to be in sync.
The inside with the outside. But if I use a ww kit on the inside and connect the ECU's together it is just going to act like an extension of the outside right? But if I join the wires of the 6 inch tubes into the wires of my outside 51 "side tubes (@ the ECU plugs) how will the pattern look. If I have a chaser going across a 51" tube how it is going to replicate that on a 6" tube? Will it chase multiple times or just once like the outside. I also ask this because I want to add two to my two grills. But again a 6" tube and 41" tube, how will they match up with the patterns?

Answer

The two ECUs cannot be linked together. If you plug a 6" tube into an Inferno V2 port, it will duplicate the first pixel of the underbody tube (the first pixel on the corner away from the wire).

See this recent forum thread for more information.

Question

If I am running a V2 UB and want to run 2x ww kits. 1 on the WW and 1 internal. is there any way for all 3 ECU's to hook up without taking the 2 ww hits and joining them to the 1 UB AUX slot?

Answer

Well what do you want each of the WW kits to do? You can easily hook up individual six-inch tubes to either the V2 or WW kit ECUs.

Question

I see it can expand with the inferno v2 underbody kit, but will it work with the regular inferno underbody kit?

Answer

The V2 wheel well kit will only integrate with the V2 underbody kit. But you can always use the V2 wheel well kit "stand alone".

Question

is there anyway not install them directly to the battry? ialdready have several things directly to the battery and im afraid to mess with it anymore. thanks - by Kasper (Beaumont)

Answer

You can wire it to any positive 12v source that is able to handle at least 2-3 amps of current.

Question

can i get them in just blue and also can i tie them into a single color underbody kit if yes can i use two of them one in the car and one in the wheel wells - by nathan (kansas city-Mo)

Answer

The Wheel Well kit is not available in only a single color, however you can have it display only a single color at a given time if you wish. No, they are not able to be hooked up in conjunction with our single color UB kit. You can use them wherever you want, inside or out.

Question

Is there a way to have all 4 wheels blue only? - by john

Answer

Yes

Question

Where are yours mounted?

Answer

Behind the wheel on the suspension.

Question

how are these different from the tron... - by Robert (San bernardino)

Answer

Cheaper

Question

does it have the UV color, hahaha its a big hit, i own that color now, at the mini truck shows, yup its not purple, its UV and you glow.. - by Robert (San bernardino)

Answer

No. It uses red blue and green LEDs. It is impossible to produce the UV wavelength with these colors.

Question

If I wire it up to a toggle switch will it keep it's memory when I turn it off and on with the toggle switch?

secondly if I have this in my car with a blaze kit will the two remotes/displays interfear with each other with crossed signals? - by Shaun (independence IA)

Answer

It will keep its memory.
The 2 remotes and displays should be OK

Question

Will you be posting a video of these? What's your name?
Thanks

Answer

Yea I will post a video once I have a suitable one. - Phil

Question

Can these be tied to alarm system? So that when alarm goes off these do to

Answer

Yes. Give them power and they will turn on. You'll likely need to use a relay and/or diode.

Question

Can they breathe (aka fade) like varad's suspension lighting? For example bright, then dim, then dimmer, then off, then dim, then brighter then brightest all over again?
Also: can you program to only color change two colors? For example blue then white, then blue then white, and so on?
Thanks again for answering questions so fast!

Answer

No, it can't display a "breathe" effect.

You can program it to change two colors.

Question

Would you say the best place to mount this is on top of tire shining down onto tire? Thanks!

Answer

I think it is better to mount it behind the wheel. But you can play with different mounting locations to see what gives you the best glow.