Oznium LED Lighting
Under glow laws in NJ State that putting extra lights on your car is legal. However, like many other states in the US, there are some restrictions, especially when it comes to the colors of your neon’s and how they’re displayed. If you live in the state of New Jersey or plan on travelling there in your […]
Why does my LED Rocker Switch not Light up? If your LED Rocker switch won’t light up, don’t panic – it’s actually quite an easy solution. If the switch won’t light up, there’s a good chance that you’ve just attached the wires incorrectly and possibly blown a fuse because of your ground and positive wires connecting. So, here is […]
Installing a rear brake light kill switch means that you have the option to turn off your rear lights, which is surely not a safe idea, especially if you’re planning on driving around like that. However, it is possible to do and it’s highly recommended that you add a buzzer or some sort of signal as well […]
Ordinary light bulbs can be dimmed by changing their input voltage, the same cannot be said for LED lights. Can LED lights be dimmed? Well, of course they can! In fact there’s more than one way to achieve this. Want to know how to dim LED lights and looking for the best way to do […]
Well, Ohio law states that even though additional lighting – which includes underglow, side cowl and fender lights – is permitted, there are a few restrictions. Your underglow lights cannot exceed 300 candle power Your license plate can only be white Your lights must not interfere or blind other drivers You cannot have moving lights, […]
Looking and feeling epic riding with your pimping lights, replacing LED/neon lights is a routine maintenance requirement and is usually a rather quick job. However, has it ever happened to you that you replace said lights and then all of a sudden your new lights are not working at all or start to flash? Well firstly, you […]
If you’re looking to connect different colored LED lights on a single strip, you’re going to run into series/parallel SMD LED wiring issues. In short, the power supply must be equal to or more than the sum of the voltage requirements, per LED and its resistor. When you want to mix colors and wire them in parallel, […]
Whether you’re installing on your emergency vehicle or simply want to add a party edge to your vehicle, a 12v flasher is certainly a good starting point. So, you should consider a 12v remote control dimmer & strobe switch, of which the general specs include: 12VDC Voltage You can power up to 2 Amps (that’s a […]
Yes, installing your own LEDs on your car, motorcycle or in your home is often said to be easy – but hey, if you need LED install help, it’s just as easy to ask. Customizable LED strips can add a pretty awesome effect to anything. So, if you’re looking to add a LED strip and have it […]
How to install LED strips? Installing LED strips can be a little complicated if you don’t know what you’re doing, especially if you’re looking for more customizable features, like having your LEDs turn on when your engine is on. So, you’re going to need a fuse to run from the battery – if you’re planning on tapping […]