Professional Clay Bar

Oznium's Garage Professional Clay Bar is a pro quality clay bar capable of removing contaminants such as bugs, tar, rail dust, and overspray from your vehicle. A clay bar acts as a magnet to foreign particles, literally pulling the grime away from the surface of the paint quickly and efficiently.

Our Professional Clay Bars are non-abrasive, and are safe for all aluminum, chrome, fiberglass, paint, and other finishes. They will not break or deteriorate into small particles like inferior, low-quality clay bars. One premium bar is enough to do 8-10 vehicles, or more depending on severity. Clay bar your paint and leave the surface ready for a polish, wax, and/or sealant.

Directions For Use:

1. Wash vehicle well - preferably 2 times. Because dirt on the surface may scratch paint, clay bars should always be used on freshly washed, clean surfaces.
2. Always use a lubricant such as Ozzy's Quick Detailer and Lubricant to help propel and move the bar easily across any surface.
3. Start by misting the surface well with lubricant.
4. Place the clay bar in the palm of your hand and rub it across the lubricated area using moderate pressure (hard rubbing is not required). You should feel a slight grabbing at first.
5. As you rub, the bar should glide smoothly over the surface.
6. When the bar moves freely, you are done. Wipe the surface with a clean, dry towel and continue in sections until the entire vehicle is complete.
7. After use the bar may become lightly soiled, No need to worry - simply pull, stretch and refold to expose a new, clean side. When the bar becomes medium to heavy soiled (light brown to dark colored) discard it.

NOTE: Always store bar in a cool area, preferably in an air tight container. After claying, the surface should be as smooth as glass. Remove any remaining smudges with a clean dry towel.