Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (0)
Yesterday (3)
which good tap connectors.?? |
Author
Message
|
tstyle
Joined: Jan 31 2004 Posts: 9 |
Are you sure you want to delete this post?
Mon Feb 02, 2004 9:59 pm
which way is good to tap the wire? i don't know which is best for neon light on footwell. you can see here
1 - cut the wire and put wire together with black tape 2 - quick connector 3 - tap connector 4 - quick slide connector 5 - quick splices 6 - Heat shrink tubes 7 - Butt connector |
|
Aken
Joined: Feb 12 2003 Posts: 9415 |
Are you sure you want to delete this post?
Mon Feb 02, 2004 10:03 pm
For an exterior connection that is open to the elements you want the most resistent type of connection. I would say heat shrink it, then go over it with a nice amount of tape.
|
|
Brandon
Joined: Jun 04 2003 Posts: 4120 Location: St. Louis, MO  1994 Mazda MX-3 Last updated: 09/06/06 2005 Geo Metro Last updated: 06/16/04 2006 Subaru Legacy Last updated: 06/18/06 |
Are you sure you want to delete this post?
Mon Feb 02, 2004 11:51 pm
butt conectors or what I use is solder and tape or heat shrink depending on the size wire.
But butt connectors work if you have a good set of crimpers |
|
tstyle
Joined: Jan 31 2004 Posts: 9 |
Are you sure you want to delete this post?
Tue Feb 03, 2004 12:57 am
i'm wondering how do you connect with butt connector? do i need to cut the wire and put them inside butt connector
|
The time now is Sat Nov 21, 2009 12:24 pm