inferno keeps blowing fuse

just installed a friends UB kit last night
we wired it to the battery posotive and negative like the infernos diagram says
worked fine last night
blew a fuse this morning and keeps blowing fuses
what should we do
bigger fuse???
different fround???

thanks

D AN N Y

wire it to something besides the BATTERY.

Tap into a 12v power source somewhere. Cigarette lighters work great.

this car has no fuses on the inside of the car and no regular size fuses like we sell here at oznium so i'm gonna have to look for somehwere that has mini fuse add a lines or something if thats going to be the case

Wire it into the radio????

The fact that it worked last night, and now doesn't leads me to unfortunately believe one of the tube's wires got shorted out from melting on a hot exhaust line.

Try unplugging all four tubes, then replace the fuse, see if the display lights up. Then plug in the tubes one at a time.

thats a good idea to try phil will do in the morning
i took extra care to keep it away from any heat source but i'm gonna go over it with a fine tooth comb in the morning

D A N N Y

Do what Phil said. There's a short somewhere you just have to find where. Wiring it straight to the battery or tapping into a circuit makes ZERO difference.

It'll actually have the possibility to be a cleaner install if you run it to the battery. Splicing into factory wiring can lead to problems and headaches later.