Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (5)
Yesterday (5)
Extending/Shortening V1 Inferno Wires |
Author
Message
|
Mikerosoft
Joined: Sep 04 2003 Posts: 198 |
Are you sure you want to delete this post?
Sat Oct 11, 2008 6:17 am
I'm wondering if anyone has had any success with extending/shortening their Inferno V1 wires that go to the tubes. Reason I ask is in my current install I have one wire that is about a foot too short, and another 6 wires that are three feet to long. I was hoping that I would be able to cut them off and solder the wires reattaching the cat5 ends, but I figured I should ask here before attempting it. Any information on the subject would be greatly appreciated. Thank you!
|
|
kornholio788
Joined: May 02 2005 Posts: 9750 Location: Racine, WI  2000 Dodge Neon Last updated: 04/20/08 |
Are you sure you want to delete this post?
Sat Oct 11, 2008 6:28 am
Ya you won't hurt anything. I am not sure how many wires are in there but as long as you connect all the wires back together correctly you will be just fine. I would def suggest soldering and shrink wrapping so you don't have problems with wires shorting and ruining your kit or something.
|
|
Mikerosoft
Joined: Sep 04 2003 Posts: 198 |
Are you sure you want to delete this post?
Sat Oct 11, 2008 10:53 am
That was the plan. Awesome! I am very glad to hear that. Thank you!
|
The time now is Wed Jan 07, 2009 8:11 pm
