what if i want a 1ft inferno kit?

1 - FlowLighting Inferno ECU $37.99
1 - FlowLighting Power Cord for UB Kits $2.99
1 - FlowLighting Remote Display $14.99
4 - FlowLighting Inferno 1 Foot Tube $139.96

Subtotal $195.93


i already have an inferno v1 kit with a splitter and 5 1ft tubes. i want to add 4 more 1ft tubes. the kit will always be on demo NEVER anything else. do i HAVE to have a display or remote to do this or can i just turn it on and be done with it? is there a cheaper way to do this? why can the ECU only control so many ft of lights? as in, why cant i buy a second splitter and the 4 tubes and be done? lol

also phil and colleagues if you read this: the 4 tubes will be used inside the car and i will be taking them out of the case to hide them and mount them easier... anyway to buy them without the cases and save a few bucks? even if its only 2-5 off per tube? its crazy that a 4ft "kit" cost as much as a 14ft kit....

Once the brain is set in last powered down mode it will resume what ever it's last mode was with or with out a display (just tested it with the V1 kit I have lying around). I think the reason the ecu can only handle so many tubes connected is because of the power as well as information that has to be distributed thru the kit.

ok, so i can atleast skip the screen, i can just plug in the one i have from the current kit, edit the setting, and switch back...

On the main product page for the Inferno there was a question asked about the amount of feet the kit will control---- 14 feet are with the 4 normal tubes and it can handle an extra 8 feet---- So you are looking at controlling about 22 feet of inferno goodness at most.......