for anyone that has done cup holder lights. |
|
ethanFBM
Joined: Jul 07 2008 Posts: 162 Location: PHX, AZ 2005 Pontiac Sunfire Last updated: 01/04/09 |
Are you sure you want to delete this post?
im about to order a few UV 4chip superflux's for my cupholders
anything i should know before installing them? or more specifically mounting them? just drill a 3/8 hole and they will pop right in? |
|
Drifting10
Joined: May 28 2007 Posts: 1770 Location: St.Joseph, Illinois 2001 Hyundai Tiburon Last updated: 12/13/07 1991 Nissan 240SX Last updated: 08/01/08 |
Are you sure you want to delete this post?
yea but make sure you can gain access to the underside of the cup holder and get the led holders
|
|
ethanFBM
Joined: Jul 07 2008 Posts: 162 Location: PHX, AZ 2005 Pontiac Sunfire Last updated: 01/04/09 |
Are you sure you want to delete this post?
so i drill a hole straight down in the cup holders and then install them from the top and pull them down through it?
|
|
Drifting10
Joined: May 28 2007 Posts: 1770 Location: St.Joseph, Illinois 2001 Hyundai Tiburon Last updated: 12/13/07 1991 Nissan 240SX Last updated: 08/01/08 |
Are you sure you want to delete this post?
yessir wires first pull threw till led is seated propperly connect wires and your good you may also wanna silicone over or around the bulb once done to prevent condensation
|
|
Aken
Joined: Feb 12 2003 Posts: 8759 |
Are you sure you want to delete this post?
REMOVE THE CUP HOLDER BEFORE DOING ANYTHING.
I'd hate to see you drill into your cup holder in the car, right into the e-brake line or a gas line or something equally important. |
|
ethanFBM
Joined: Jul 07 2008 Posts: 162 Location: PHX, AZ 2005 Pontiac Sunfire Last updated: 01/04/09 |
Are you sure you want to delete this post?
alright sounds good thanks guy
thanks aken too wow damn didnt even think of that ha |