6 inchers and Inferno splitter

The 6 inch million color tubes have connectors that are 3 "prongs" alltogether.

The splitter is done ethernet cord style.



Am I missing something or is tis really how its supposed to go to connect them?

this splitter is for an inferno v1 or blaze kit
http://www.oznium.com/splitter

the 6 inch tubes do not work with the above splitter.
http://www.oznium.com/6inch

the 6 inch tubes work stand alone, or they'll work with the inferno v2, or inferno v2 wheel well kit

hope that helps

To split the V2's wires, just cut the wires and twist the wires together seperately. IT's easy since there's only 3 wires to bond up.

I'm even more lost then when I started.

Perhaps some clarification or further explanation will enable others to help you better.

Ok, in short, don't buy a splitter.. just do this.



I dunno if those wires are the right colors.. but you get the point.

if u have the inferno v1 the splitter will work with the 12'' tubes

if u have the inferno v2/wheel well kit, this splitter for the v1 will not work but u do not need it the green adapter can either plug into ur aux port or just take the wires out and wrap the live wires around each other then replace in orignal spot

Ok, ty guys =)