Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (0)
Yesterday (3)
Muffler Swap |
Author
Message
|
brymck
Joined: Apr 16 2007 Posts: 97 Location: Maine  2003 Chrysler PT Cruiser Last updated: 10/21/09 |
Are you sure you want to delete this post?
Tue Jan 20, 2009 6:50 pm
I know that it's probably all relative, but if i bought a muffler with the correct offset and size as the stock muffler, how much would a typical exhaust shop charge to swap them out and make sure it was all properly sealed and hung?
|
|
BLAZER_97
Joined: Apr 10 2007 Posts: 1402 Location: Decatur TX 1997 Chevrolet Blazer Last updated: 07/08/09 1991 Isuzu Impulse Last updated: 06/12/07 |
Are you sure you want to delete this post?
Tue Jan 20, 2009 7:25 pm
mine cost 30
|
|
Tat2Dragons
Joined: Jan 21 2007 Posts: 2103 Location: Baltimore Maryland 2003 Honda Element Last updated: 09/21/07 |
Are you sure you want to delete this post?
Tue Jan 20, 2009 11:11 pm
Depending on the shop,I've seen it range from around $40.00 to $60.00
|
|
lbjshaq2345
Joined: Jul 11 2007 Posts: 1524 Location: Jonesborough, TN 2007 Scion tC Last updated: 12/02/08 2002 Ford Explorer Last updated: 08/14/09 |
Are you sure you want to delete this post?
Wed Jan 21, 2009 11:19 am
If the intake and output of the muffler are the same diameter as your stock piping, it should be pretty cheap. I went to K-Mart and had a friend put mine up on the lifts so I could do it myself. Going to get it welded soon though, the bouncing and jiggling annoys me even if I can't see it lol.
|
|
02cougarman
Joined: Jun 23 2008 Posts: 920 Location: OH 2002 Mercury Cougar Last updated: 11/22/08 |
Are you sure you want to delete this post?
Wed Jan 21, 2009 11:33 am
i could weld it
|
|
PwrRngr
Joined: Jul 19 2007 Posts: 3589 2003 Ford Mustang Last updated: 01/23/09 |
Are you sure you want to delete this post?
Wed Jan 21, 2009 1:20 pm
If you weld it, make sure the piping and the muffler are NOT galvanized. If it is galvanized and you weld, it'll burn all the galvanization off (around the weld) and cause it to rust quickly.
|
The time now is Sat Nov 21, 2009 6:02 am