1996 Pontiac Grand Am Door Panel Removal |
|
DuzzleKid
Joined: Jan 13 2009 Posts: 132 Location: Tucson, AZ 2003 Chrysler PT Cruiser Last updated: 07/10/09 |
Are you sure you want to delete this post?
i have a 1996 grand am and i want to remove the door panels to install some new speakers.
how do i remove the door panels? or can i install them without removing it? |
|
coolbam
Joined: Nov 05 2008 Posts: 1910 Location: Dayton OH 1987 Ford Mustang Last updated: 06/03/09 2003 Ford Mustang Last updated: 08/21/09 |
Are you sure you want to delete this post?
Pix
|
|
Tim
Joined: Nov 16 2003 Posts: 10360 Location: Kalamazoo, MI 1998 Pontiac Grand Am Last updated: 03/11/07 |
Are you sure you want to delete this post?
Pretty sure they just pry right off. There are several tabs that come off with a little force.
|
|
corvettecrazy
Joined: Dec 17 2003 Posts: 3932 Location: moved (twice) 1996 Pontiac Bonneville Last updated: 06/11/07 2000 Chevrolet Corvette Last updated: 08/31/04 |
Are you sure you want to delete this post?
There are going to be a few screws in there too I believe.
|
|
clutch1
Joined: Oct 08 2006 Posts: 1830 Location: around hurr. 2001 Oldsmobile Alero Last updated: 04/10/08 1999 Buick Park Avenue Last updated: 10/04/08 |
Are you sure you want to delete this post?
It's either little clips or locking slides, prolly clips from back then.
When you get all the screws out try sliding the whole thing upwards.. if it doesn't budge assume that it's clips, get your hand behind it, and pull and it should pop off. If it's on slide locks, it's basically just plastic hook that lock when it's down, and to get it off just pull up and out. |
|
DuzzleKid
Joined: Jan 13 2009 Posts: 132 Location: Tucson, AZ 2003 Chrysler PT Cruiser Last updated: 07/10/09 |
Are you sure you want to delete this post?
ok sweet. thnx.
yea its my friends car and he was wondering. |