New guy

My car...nothing special... Enjoy!

its just built n boost
The Car
old


current


old setup (nothing special)



then i went and did this lol oh well
(oo i can see you!!)


Oh some interior ****

i <3 bride (my whole interior is going to be wraped in bride, new bride seats etc, roll cage blah blah )



dont mind the mess, i can't help myself sometimes



Other stuff for my new turbo setup ;) teasers




All in all.. i have umm lol 10-15k or more in this car.. before the motor build or new turbo setup ... lol oops

Hello. Welcome.

Welcome. Nice ride.

what kind of numbers are you making?

justinwebb wrote:

what kind of numbers are you making?

old setup

300ish@9psi

new setup

lol

well

400whp@12psi or im building a new setup

and thennn on high boost welll who knows i wanna do freeway burnouts.. so im gnna say 500+

ill post dyno sheets this summer when its running again

Tat2Dragons wrote:

Welcome. Nice ride.

thanks for the warm welcome

Nice car. (Except for the rear hood spacer things, that looks retarded)

specv118 wrote:

Tat2Dragons wrote: Welcome. Nice ride. thanks for the warm welcome

Your welcome.

corvettecrazy wrote:

Nice car. (Except for the rear hood spacer things, that looks retarded)

lol dude function over form

do you have any idea how hot it gets under the hood

if i didnt space the hood the bottom side of the hood turns yellow from the heat lol

specv118 wrote:

corvettecrazy wrote: Nice car. (Except for the rear hood spacer things, that looks retarded) lol dude function over form do you have any idea how hot it gets under the hood if i didnt space the hood the bottom side of the hood turns yellow from the heat lol

I like the color yellow.... WHATS WRONG WITH YELLOW?!?!?!?

oh and hello there

specv118 wrote:

corvettecrazy wrote: Nice car. (Except for the rear hood spacer things, that looks retarded) lol dude function over form do you have any idea how hot it gets under the hood if i didnt space the hood the bottom side of the hood turns yellow from the heat lol

You could have achieve the same effect by removing the rubber seal which by your pictures, you left intact. Also if you are doing anything but sitting still, air is entering that gap, not exiting.

Nice car. Where in wisconsin are you?

lol ill wait till i see an actual dyno sheet to believe it haha

corvettecrazy wrote:

specv118 wrote: corvettecrazy wrote: Nice car. (Except for the rear hood spacer things, that looks retarded) lol dude function over form do you have any idea how hot it gets under the hood if i didnt space the hood the bottom side of the hood turns yellow from the heat lol You could have achieve the same effect by removing the rubber seal which by your pictures, you left intact. Also if you are doing anything but sitting still, air is entering that gap, not exiting.

Yes lets remove the rubber seal in a state that has snow and rain. that makes perfect sense. The hood is up enough to let head out, standing still and moving.

when i sit still i turn my pusher fans on, when im moving there off.

the air is always moving, its never sitting still.

justinwebb wrote:

lol ill wait till i see an actual dyno sheet to believe it haha

typical honda driver (no offense)

kornholio788 wrote:

Nice car. Where in wisconsin are you?

franklin/oak creek area

AutoAustin wrote:

specv118 wrote: corvettecrazy wrote: Nice car. (Except for the rear hood spacer things, that looks retarded) lol dude function over form do you have any idea how hot it gets under the hood if i didnt space the hood the bottom side of the hood turns yellow from the heat lol I like the color yellow.... WHATS WRONG WITH YELLOW?!?!?!? oh and hello there

ehh it doesnt go over well when its next to silver.

maybe if the car was black, then we'd have something! lol

lol not just a honda owner i also own a 93 RX7 that is pushing 574 HP and the honda is pushing 406 HP. Both have dyno sheets to back them up I dont just guess what my cars make nor do i bench race. So i know what i am talking about so think before you speak.

holy triple post batman.

haha

car looks nice

specv118 wrote:

kornholio788 wrote: Nice car. Where in wisconsin are you? franklin/oak creek area

You are like 20 min from me max. And at this exact current moment in time you are like 20 min from the owner of this site as well.

We should meet up sometime.

DJTricky wrote:

holy quad post batman.

fixed

oops lol my bad

How the **** did I not realize this was you. hahaha I feel dumb now lol!

kornholio788 wrote:

specv118 wrote: kornholio788 wrote: Nice car. Where in wisconsin are you? franklin/oak creek area You are like 20 min from me max. And at this exact current moment in time you are like 20 min from the owner of this site as well. We should meet up sometime.

HAHAHAHAH!!! funny part is you've met already! i love this thread! =]

justinwebb wrote:

lol not just a honda owner i also own a 93 RX7 that is pushing 574 HP and the honda is pushing 406 HP. Both have dyno sheets to back them up I dont just guess what my cars make nor do i bench race. So i know what i am talking about so think before you speak.

hey now there champ, never said your stupid. dont twist my words.

but its hard to dyno something that doesnt run yet ;)

you should know that

so lets start over.

Hi im the nissan guy lol

kornholio788 wrote:

How the **** did I not realize this was you. hahaha I feel dumb now lol!

**** owned

i met the owner last night DUH remember dan! lol

justadream1121 wrote:

kornholio788 wrote: specv118 wrote: kornholio788 wrote: Nice car. Where in wisconsin are you? franklin/oak creek area You are like 20 min from me max. And at this exact current moment in time you are like 20 min from the owner of this site as well. We should meet up sometime. HAHAHAHAH!!! funny part is you've met already! i love this thread! =]

best part.. my names in my sig. lol

Well i see lots of hazing has taken place. Nice Car, Welcome to Oz. And since we now have a Honda/Mazda guy, and now a Nissan guy, I'll introduce myself as the Audi Guy, haha. I've got an 87 Audi 5000. Nothing much yet, but plenty of plans for it.

specv118 wrote:

justadream1121 wrote: kornholio788 wrote: specv118 wrote: kornholio788 wrote: Nice car. Where in wisconsin are you? franklin/oak creek area You are like 20 min from me max. And at this exact current moment in time you are like 20 min from the owner of this site as well. We should meet up sometime. HAHAHAHAH!!! funny part is you've met already! i love this thread! =] best part.. my names in my sig. lol

HAHAHAHAH! it is isn't it. awesome.

holy triple post again

haha HI im the tahoe guy.
or the loud guy
or the .... i ran out of names now

so hi

your the 12 12s in a tahoe guy

lol close... 12 10's lol

specv118 wrote:

Yes lets remove the rubber seal in a state that has snow and rain. that makes perfect sense.

Wait, so you wont remove a rubber seal, but you will add spacers so that it is no longer touching the seal?

Hai Preston. *waves*

corvettecrazy wrote:

specv118 wrote: Yes lets remove the rubber seal in a state that has snow and rain. that makes perfect sense. Wait, so you wont remove a rubber seal, but you will add spacers so that it is no longer touching the seal?

yes, its only open enough to let heat out, water/snow cant get in if thats what your implying

haha this is great.

nissan guy

honda/ford...i mean mazda guy (oops)
audi guy

etc.

look what i started

Hes got a robbie hood

Oh and i see between the gap of the hood.\

And im the Blazer Guy

where did you get ford?

maybe because ford is part owner of mazda

yes but still built by mazda and still much much higher quality than ford. some parts are interchangeable but not many.

sad but my resale value is wayyyyy more than yours and much older.

not sure why it matters that its part owned by ford