Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (4)
Yesterday (0)
Wiring diagram AIS |
Author
Message
|
CaptHank
Joined: Apr 20 2009 Posts: 1 |
Are you sure you want to delete this post?
Mon Apr 20, 2009 5:22 pm
Good evening, guys...
New member here, needing some advice. I have attached a link of my desired goal. I want to use the LED that don't require a resistor, which I found at Radio Shack. http://www.panbo.com/archives/2008/12/nauticast_b_mod_a_silent_mode_switch.html For the life of me, the "light bulb" in my head is going on with the schematic listed. 1. The Nauticast switch has only two leads, whch doesn't require power. But, the LED's require power. How, pray tell, do you do this thru the same switch. If someone could break this down into a more user friendly schematic, I would appreciate it. Even better, send me an email with the schematic. Thanks in advance... Capt. Hank |
|
byte
Joined: Mar 25 2009 Posts: 311  2002 GMC Sierra Last updated: 08/06/09 1949 Lamborghini Countach Last updated: 10/08/09 1995 Chevrolet CK Pickup Last updated: 11/08/09 |
Are you sure you want to delete this post?
Mon Apr 20, 2009 8:05 pm
I see a 12 volt power lead feeding the relay which powers the led lights.
|
The time now is Wed Mar 17, 2010 2:38 pm