FroZone needs help with pedals

So watch the vid i got these pedals on a whim at autozone. cept idk how this goes together and the instructions SUCK. so if you know anything about these let me know. otherwise they go back to the store. they have a nice look. but the application.....

Thanks

http://www.youtube.com/watch?v=607et9EdMWM

Most of those style pedals need modification to work ... I've had to cut the stock pedals down to have them fit underneaththe aftermarket pedals , You can sometimes drill tru the stock pedals to mount them tru the stock pedals ... Other times the metal pieces need to be bent around the pedal to help secure tem

why can't you take off the stock pedal and add the aftermarket

Most of the time they do not pivot

No offence,but those are actually quite simple to install,surely you could figure out how to install them just by reading the directions and looking at the pictures. If not,all you really need to do is pick out the brackets and screws that will give you enough space to sandwich the stock pedal in between. Then simply lay the aftermarket pedal over top of your stock pedal,hook the brackets behind the stock pedal,then insert the screws to the front,or back(depending on the design) and tighten them.That's pretty much it on those style pedals.Hope this is of some help to you.