Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (0)
Yesterday (3)
wiring |
Author
Message
|
horse517
Joined: Aug 06 2009 Posts: 7 |
Are you sure you want to delete this post?
Fri Aug 14, 2009 1:14 pm
First thank you for all the responses regarding the LED flashing/steady mode issue. I am using a honda ATV for use the Sheriff's Office. I have installed the following:
1 Strobe unit 1 wig-wag using small fog style lamps 1 horn several low amp leds. I currently have a hot wire ran from the battery to the front of the ATV for each application. Too much wire. My question is can I run only 1 hot wire and branch off of it for each application. Similar to the water hose/gopher illustration I saw on this board. Thank you for any info. btw I am using 16 awg |
|
bad venge
Joined: Jul 28 2007 Posts: 1602  1998 Dodge Avenger Last updated: 05/18/09 |
Are you sure you want to delete this post?
Fri Aug 14, 2009 1:54 pm
You'll need to find/measure the TOTAL current draw from ALL those parts you have listed , then size the MAIN wire to take the total of the current , then you can use a distribution block or other means to branch out to each item
|
The time now is Sat Nov 21, 2009 6:51 am