FS: V2 Tubes 3ft, 4tf, 6"

I've got tons of **** I want to get rid of. Pics available on request. You all know me, I'd like to think I'm a good seller around here.

7x Inferno V2 6" Tubes - $15 Each + $4 shipping
4x are new, and 3x are used.

2x 3' V2 Tubes - $80 Each + $4 shipping
Tubes work fine.

2x 4' V2 Tubes - $100/$90 + $4 shipping Each
One of the tubes is a little faulty, 3 red LEDs flicker when you tap the tube.

1x V2 ECU - $40 Shipped

1x V1 ECU - $25 Shipped
Pretty simple.

2x V2 Remote $15 shipped Each

3x V1 Remote $8 shipped Each

what are the 6' tubes for? Wheel well maybe?

the 6" tubes can be used for wheel wells or interior or anything you want it to do but works best with the v2 ecu

When connected to only a 12 volt + the 6" tubes will cycle through a million color loop. When connected to the V2 ECU it can do patterns, single pixel only, and flashes and all that junk.

Need money. Bump!

Tim, in your opinion, how is this (2x4's, 2x3's, ecu, 1 remote) vs buying a new inferno original?

Well, the V2 is considerably brighter than the original V1. You're talking about Superflux LEDs vs standard 5mm LEDs on the V1.

I should warn you though, that one of the 4' tubes is faulty and "flickers" when there's vibration. Only one set of LEDs do that though. I believe there are four or five "sets" of 5 LEDs. I can get a picture of it if you would like.

willing to sell the ecu seperate?

Yeah, all the **** can be sold separately.

alright i may take that give me a day or two to figure it out but consider it sold

Which ECU did you want? V1 or V2?

V2

Cool. knot07@yahoo is my paypal. Just let me know when you've sent it.

This is a LONG shot, but did the V2 ECU sale go through? I've been looking everywhere for one.

I actually still do have it.

$40 shipped and it's yours.

I'm down. Can u dm me your PayPal? And this works 100%?

My paypal address is three posts above yours.

Guaranteed to work, I've ran my V2 tubes on it several times along with shorter 6 inch tubes.

You're getting just the ECU though, correct? Power wires, remote, display those aren't included. Just wanted to make sure you knew.

That's fine. I've got the rest. :)

Switching the wires around on my ecu today proved it was my ecu that was bad. Only 1 port displayed properly, and any and all tubes connected to that port worked perfectly. The other ports made the tubes just cycle, so I know my lights are good. Total relief. I just want my lights to work again. :P

So yeah, just the ecu. (Sorry, a little excited I actually found one, thanks again!!!)

Not a problem, I'm glad to get rid of it. I could use the extra $$$.

I assume your Paypal payment will have your shipping location on it, but feel free to PM it to me so we're 100% sure.

Sent the PM. :)

Do I send to your knot07@yahoo address?