Switch from Blue to Red theme?

I've had a blue theme going on in my car since i started it years ago, but i'm thinking about changing to a Red theme especially after doing an install on a customer's black 09 vette.

Here's mine:




here's his:




I would also swap out my underglow from blue to red.

what do you guys think?

stick with blue, it is a more vibrate color. i like red as a color better then blue, but i like blue glow better.

I find with the red I need a lot more LED's to get a bright glow than the blue. Red is a better color for lighting the interior WHILE driving though.

red glow is nice but blue is 3 times as bright.

Green is more NVG friendly

Its really hard to say. Red and blue both look good against a black surface.

I would probably say no just because you already have the blue.

Red looks good on black slick cars and you car is black and slick.

I'd do red.

I used to have everything blue (gauge cluster/hvac/pod gauges, foot wells, dome light) but after a few years of it and alot of headaches from night driving I switched to all red (well RGB and controller but it is red when driving) and I can say while it's not as bright (the human eye picks up blues and greens better) it is clearer and alot nicer to drive with at night...

All I'd say is if going for red after blue, double up on the light sources to compensate for the drop in output. I'm running the V2 wheel well kit as my interior lighting and I can say for sure that the three 4chip superflux's are brighter than the flex led strips when red to red on black.

Why not leave the blue in and add red as well ? Or take this opportunity to go RGB ?

yeah both would be cool but i like the blue more

Blue.

wow....sounds like a split in the voting.

Keep the Blue.

Yeah it's a vibrate color. Keep it.

i say red on the outside, blue on inside and engin bay :-p

I've decided to do red in the inside (crusing lights) and OEM interior lights mostly due to the fact that red is easier on my eyes for night driving.

I will be updating my underglow to more powerful LED strips so i'm still up in the air about red vs blue underglow. Both will be equal cost and installation difficulty.

*red* cough cough

Green!

Radioflyer wrote:

I've decided to do red in the inside (crusing lights) and OEM interior lights mostly due to the fact that red is easier on my eyes for night driving.

Sometimes I wish I would of done red instead of Blue for the same reasons... Blue reflects off the tint and makes it more difficult to see.. Red I think would be better but im already too involved in Blue to switch.

chicks like blue better


so keep the blue ;)

RED all the way ... you'll need tons more red to get the brightness as the blue ...

i think its a really sweet idea, you could use a 5 pin relay, and a swich, im sure you already know how you would go about it but yeah lol do it

blue

Okay my final decision:

OEM interior lights and exterior door handles: Red

Everything else will remain blue....though may be re-aimed.