Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (0)
Yesterday (0)
Remote turnon toggle |
Author
Message
|
rhpham2
Joined: Feb 20 2008 Posts: 9 Location: Houston |
Are you sure you want to delete this post?
Mon Oct 26, 2009 9:28 am
Ok, I have a new head deck for my car and Im trying to connect my remote turn-on wire from the deck to a led toggle switch so I can turn off on or off my amp with my choosing. The switch has three terminals-GND, Constant, Load. I just want to verify my connections are correct without blowing anything up. I connect remote-turn on to Constant, GND to ground, and load to amp. I just don't know if this type of configuration will turn on the led on the switch or if I would short something out when I turn it on/off. Would a relay work better in this configuration? I don't want to make it to complicated. HELP....
|
|
PwrRngr
Joined: Jul 19 2007 Posts: 3849  2003 Ford Mustang Last updated: 01/23/09 |
Are you sure you want to delete this post?
Mon Oct 26, 2009 9:31 am
That's correct. The GND is just to ground the LED in the switch.
|
The time now is Sat Mar 20, 2010 1:36 pm