JL e2150 amplifier

Heres the deal, i just bought a new amp for my subs, this amp is a nice piece of equipment, i have only had it for like 4 months, it has some minor minor minor cosmetic damages

These specs i copied from the jl site
http://www.jlaudio.com/amps/e2150.html heres the link for pics

Specifications:

Available: Now Shipping

Rated Power (stereo):
45W RMS x 2 @ 4 ohm (12.5V);
75W RMS x 2 @ 2 ohm (12.5V)

Rated Power (bridged):
90W RMS x 1 @ 8 ohm (12.5V);
150W RMS x 1 @ 4 ohm (12.5V)

THD at Rated Power:
<0.08% @ 4 ohm (20 Hz - 20 kHz)

S/N Ratio:
>104 dB referred to rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)

Frequency Response:
10 Hz – 25 kHz (+0, -1dB)
Damping Factor:
>200 @ 4 ohm per ch. / 50 Hz,
>100 @ 2 ohm per ch. / 50 Hz

Slew Rate:
± 22V/µs
Input Range:
200mV – 8V RMS
Dimensions:
9.8" x 9.25" x 2.36"

Features:
Absolute Symmetry™ Class AB Circuit (U.S. Patent #6,294,959)
Differential, Noise-Cancelling Input Topology:
RCA jack inputs (low-level) and multi-pin jack (high-level)
On-board Crossover:
State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50 – 200 Hz. Configurable as Low-Pass or High-Pass

Preamp Output:
Pass-through type.
Speaker output connections:
accept up to 8 AWG wire
+12V and Ground connections:
accept up to 4 AWG wire


any questions Leave a post IM me SuBZeRo69069 Email- Djrave06660@yahoo.com

how much do you want for it?

if the price is right im looking for something for my components.

i can give it to you for around $120 and u pay shipping i think its pretty fair. it was 200 in the store. i still have the original box with the styrofoam and ill pack the warranty and the paperwork for it

here are some pics for you guys

hmm...Could it power a 10 inch Kicker Solo Baric?

what are their specs