Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (0)
Yesterday (0)
LED question |
Author
Message
|
HoolaKinG
Joined: Apr 24 2003 Posts: 930  1994 Ford Taurus Last updated: 06/18/09 1996 Ford Taurus Last updated: 10/12/06 2008 Mazda 3 Last updated: 04/13/09 |
Are you sure you want to delete this post?
Thu Apr 24, 2003 9:21 am
I'm sorry if this has already been answered, but...
Is it possible to take the wires that go from the light that turns on when my door is opened(under the dash) and simply hook those up to the LED with the resistor on it? Or will this not work at all? Also, would it be possible to hook up multiple LED's this way? I looked at some of the other posts, but this is the first time I'm attempting to do this, so I want to make sure I understand it, but from what I've read it sounds like it should be possible. Thanks for any help you can give. |
|
PTCruzr
Joined: Feb 12 2003 Posts: 395 Location: Woodstock, GA |
Are you sure you want to delete this post?
Thu Apr 24, 2003 10:24 am
Yep, the wires going to the dome lamp are 12 volts so using an LED with a resistor would work fine.
You could also hook up multiple LEDs if you want to. Check out my LED diagrams in the Diagrams section for more info on connecting multiple LEDs. |
|
Goph
Joined: Feb 14 2003 Posts: 3824 Location: Iowa 1995 Pontiac Grand Prix Last updated: 09/04/04 2000 Pontiac Grand Prix Last updated: 05/11/06 |
Are you sure you want to delete this post?
Thu Apr 24, 2003 1:29 pm
should be very easy to do
|
The time now is Mon Mar 22, 2010 1:42 am