Search
Register
Login
The value of this forum is in the interaction with your fellow glowers and car enthusiasts.
Register today! - It is FREE and quick
Register today! - It is FREE and quick
Today (1)
Yesterday (3)
Phils Leds |
Author
Message
|
lukeb5301
Joined: Apr 18 2003 Posts: 129 Location: Arcadia, WI |
Are you sure you want to delete this post?
Thu Aug 07, 2003 3:39 pm
Ok I just recieved the leds and they came with another long thing im assuming is the resitor... other leds ive gotten have had wires on them so im not used to this kind... do i have ot hook them up a speical way? i tried runnin a wire too it and got nothing, and i tried runnin a wire to te resitor which was connected to the led, and nothing? ne help is appricated
|
|
Goph
Joined: Feb 14 2003 Posts: 3826 Location: Iowa  1995 Pontiac Grand Prix Last updated: 09/04/04 2000 Pontiac Grand Prix Last updated: 05/11/06 |
Are you sure you want to delete this post?
Thu Aug 07, 2003 3:41 pm
this is one his site under the leds |
|
lukeb5301
Joined: Apr 18 2003 Posts: 129 Location: Arcadia, WI |
Are you sure you want to delete this post?
Thu Aug 07, 2003 3:45 pm
k do i have to soder this resitor on or how do i hook it up to the led and then to the wire since its kinda a rod not a wire, cuz i dont have a soddering thing or nothing so ne other way would be nice..
|
|
Goph
Joined: Feb 14 2003 Posts: 3826 Location: Iowa 1995 Pontiac Grand Prix Last updated: 09/04/04 2000 Pontiac Grand Prix Last updated: 05/11/06 |
Are you sure you want to delete this post?
Thu Aug 07, 2003 3:51 pm
the only way i found that works is to soder the resistor on to the led and then a wire on to the resistor
|
|
lukeb5301
Joined: Apr 18 2003 Posts: 129 Location: Arcadia, WI |
Are you sure you want to delete this post?
Thu Aug 07, 2003 3:52 pm
well **** that sucks
|
|
Phil
Owner, Oznium.com Joined: Feb 11 2003 Posts: 6523 Location: Bay Area, CA 2001 Toyota Highlander Last updated: 08/02/08 2000 Toyota 4Runner Last updated: 05/28/07 2006 Scion tC Last updated: 11/12/07 2002 GMC Sierra Last updated: 08/02/08 |
Are you sure you want to delete this post?
Thu Aug 07, 2003 4:37 pm
Read this page: http://www.oznium.com/product_info.php/products_id/29
|
|
HoolaKinG
Joined: Apr 24 2003 Posts: 518 1994 Ford Taurus Last updated: 10/04/06 1996 Ford Taurus Last updated: 10/12/06 2008 Mazda 3 Last updated: 11/23/08 |
Are you sure you want to delete this post?
Fri Aug 08, 2003 5:58 pm
If you just twist the wire of the resistor around the longer wire from the LED then use electrical tape it will work - that's what I did.
|
|
brim
Joined: Jun 16 2003 Posts: 72 1999 Oldsmobile Alero Last updated: 04/10/05 |
Are you sure you want to delete this post?
Sat Aug 16, 2003 9:27 pm
yeah dude you should really have no problem
i hooked up my led's with little to no prob, i think the only thing i ran into was a matter of getting the resistor on the right side, even with just a twist of the prongs on the led and the wires i had light. Now I'm just waitin for cathodes once I get a new job, damn you phil! I had that money for a day and it went to bills right after hehe I'll have my cathodes I will, just as long as I don't have a lower intake gasket leak |
The time now is Fri Jan 09, 2009 7:00 am
