Weird Blaze Display Occurance...

I have had no real problems with my blaze kit to date...A few days ago tho I installed the Flowlighting HID Headlight kit...which mite I add is a sweet kit....anyways @ the same time I noticed that my display unit for my Blaze kit started acting a bit funny.....Heres one of the displays it came up with when its off aside from the Normal "P" representing that the power is off..



It only acts up when the power is off......One time it showed this symbol in hte pic, anoter time there was no "P" and nothin just a blank screen like no power was to it, one time was like an "L" shape......But the weird thing is when I hit power it all comes on the same as normal.....no stalling or anything different ... Then I can shut it off and the Normal "P" comes up like nothing odd happened......So.... if it happens again Ill try to get another pic w/ my phone for you guys 2 see but if any1 has any suggestions feel free.....Thanks

mine does that sometimes. do you leave the kit powered and use the remote for ON/OFF? if so switch the power line. that cured it for me. seems that if the ecu is constantly powered it heats up alot and starts making the display act funny.

When you say switch the power line are u suggesting I get a new one or just turn it off and back on........And the display didn't affect your lights did it???

He means put a switch on the constant power line.

I think the blaze kit comes with a switch on the constant power line but Id have to pop the hood everytime to turn it on and off which ill have to pass on I could run it up but dont have any good spots for it....n e ways heres the latest pic that isnt the normal "P" .....



I kno when u have it on and the LEDs workin itll have sumthin like "C7" but this is i dunno...

LOL leave sumthin

yeah put a switch on the power line. i have one in my dash to turn the kit on/off and havent had any display probs since.

and the kit always worked fine just had the strange displays.

Its your display. Mine does that. If I push on the thig it doesn't do it. I don't really care. It still works

Mine did that when i put my strobes on at the same time, but when I turned them off, it displayed normal.

Sounds like an interference problem. Meaning there's a power wire run too close to the Blaze remote display, and it's confusing it. Try rerunning one of the wires, see if your problem goes away.