Ozzy's Signature Quick Detailer and Clay Lube

Ozzy's Signature Quick Detailer and Lubrication is an slick, synthetic, wet-finish polymer detailer. No wax, no film, no-effort, and non-streaking. Formulated using a special synthetic lubricating agent designed to reduce static-causing surface friction by over 75%. By reducing static caused by drying, quick detailing, wax application and removal, and other activities, our Signature Quick Detailer limits airborn dust deposits by over 50%, and greatly reduces the risk of scratching delicate paint surfaces.

• Anti static formulation reduces static charges while gently removing fingerprints, smudges, and other light contaminates.
• 100% wax, alcohol, silicone, and streak free.
• Removes dust and restores shine in one quick spray.
• Maintain a better than showroom sparkle easily, inexpensively, and in seconds.
• An excellent time saver and aid for removing stubborn polishes or waxes.
• The perfect shine solution in between washes or major wax applications, or on-the-go places like car shows and road trips!
• Highly-reflective synthetic shining agents form an ultra-thin protective coat that bonds to waxes and synthetic sealants.
• Designed to perform even in hot, humid climates without streaking, clouding or hazy patches.
• Use on paint, glass, chrome, gel coat, fiberglass and Plexiglas.

Directions For Use

As a Quick Detail or Maintenance Spray:

1. When using in very hot, direct sunlight, always mist on towel not surface. This will eliminate a hot surface from drying the product before you have an opportunity to even touch it with a towel.
2. Simply mist on towel or surface and wipe off with a clean cotton or microfiber towel.
3. For the best results, use a microfiber towels to attract dust and minimize the risk of scratching. Do not use the same towel on your paint and glass that you have used on your wheels.
4. Mist after washing, while drying, or anytime for a fast dry with a superior shine.
5. Excellent when sprayed on towel and used to remove crème or paste waxes that have hardened.
6. Superior surface shine when used as a final cleaner to remove smudges or smears left behind from waxing or sealing.

As a Clay Bar Lubricant:

1. Wash surface well with a premium car wash shampoo such as Suslow Suds prior to claying the surface
2. Shake well. Work in areas about the size of a car door or half the hood.
3. Generously spray a light mist over clean surface,
4. The objective is to keep the paint surface and clay well lubricated with the liquid detailer so the bar picks up the embedded debris in your paint, yet can still glide smoothly across the surface without the risk of scratching the surface.
5. Continue lightly rubbing the clay over the surface until it moves freely.
6. Occasionally wipe off any residue with a towel and proceed to the next areas.
7. If clay is hard to move or appears to resist easy wipe off, re-mist the cleaned area, then spray lubricant over the clay's surface.
8. For deeper cleaning when clay barring, only use Quick Detailer and Lubrication and never shampoo and water. This will extend the life of your clay bar as well as offer superior surface lubricity, providing a nice slick surface for the clay to slide across.