Use it either as an On/Off switch, or fine tune the brightness of your LEDs, and LED strips with this simple in-line LED dimmer.
There's no moving parts, so there's nothing to break or wear out over time.
It only takes a light tap to turn it on, and another light tap to turn it off.
And hold your finger to it to smoothly cycle through the brightness levels.
Once you find the perfect brightness to suit your mood, just remove your finger, and your LEDs will stay glowing at that brightness.
It has memory! So even if you remove power to the unit, it will remember the last brightness level. When you turn it back on, it will go straight to the last brightness level. When power is removed, the LEDs will obviously turn off. The when power is re-applied, you must tap the Touch LED Dimmer once to turn the LEDs back on.
Comes pre-wired with two common AC adapter plugs (barrel connector type). But if you don't want to use those, its very easy to just snip off the connectors, strip the wires back, and hook them up directly to your 12v power source / LEDs.
Max current? 3 amps at 12 volts.
Touch LED Dimmer - Adjustable Brightness Controller for LEDs
Touch LED Dimmer Photos
Action Shots
Touch LED Dimmer Technical Info
Maximum current / power:36W / 3 amps @ 12V input
72W / 3 amps @ 24V input
1) ON/OFF function:
Touch the switch and then release
2) Dimmer Function:
Touch the switch and hold. Brightness will be either Min-to-Max or Max-to-Min
If you don't want to use plug, you can cut them off and then connect the red-black wires like below:
Customer questions & answers
Hi can I use this as only an on/off switch with a 4pin relay I used to wire halos? Thanks
Hello,
You can use that, not sure how the dimming feature would work though. If you need just an on/off switch, maybe try this: https://www.oznium.com/switches/anti-vandal-led-switch
You can use that, not sure how the dimming feature would work though. If you need just an on/off switch, maybe try this: https://www.oznium.com/switches/anti-vandal-led-switch
Do you have this product or something similar that can be connected to a table lamp with LED bulbs with standard base that operates on 110 volt ac house current. The led bulb I bought is great but the lumen output is so bright I would like to dim it occasionally to suit my comfort level.
Sorry, we don't have controllers that can operate on 110V.
Can I wire 5 Single Surface Mount LED's into this?
Yes.
Customer Reviews
Apple's Sleek Look, Oznium's Awesome Product
Jordan Moddes from Kenosha, WI
Well, this touch dimmer looks like a few apple products and it's okay, I hate apple too, but the look is nice.
The dimmer works awesomely ONLY if you touch it with literally a finger. yes, this means if you hold it in your hand and try to do stuff, nothing will happen; why? "the entire case is touchable/conductive" - really smart guy.
Overall really cool and neat and INCREDIBLY small where you can mount literally anywhere. Only opportunity, wish it came with the plugs that go with the controller, but that's when you get creative and just cut those plugs off ;) Great Job Oz and Team and hope to see more cool things!